Multi-Tooth Annular Cutters

Power Tools

cutter_material

cutting_diametermm

depth_of_cut

shank_diameter

shank_type

type

brand

categoryId

stockStatus

Consumables & Accessories

Rotabroach

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4” pilot bore and can be used in most magnetic drills. 700N/mm2 material hardness.
Standard Cutter Series
Depth of cut: 25mm.
Bore: 6mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the conventional twist drills or drill bits. 
Compatible batteries - MLW2805460N, MLW2805560M, MLW2805545L.

Features and Benefits
• Cutters are made of super tough high-speed steel (M2 grade) with 3/4" Weldon shank compatible with all magnetic drills
• Accurate, symmetrical, fine finish hole cutting capabilities
• Reduced friction between the HSS core drill and the material
• Time and energy savings 

Typical Applications
• The ideal choice for all your magnetic drilling & cutting applications
• Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal, structural steel, plate, tubing or material that requires a fine finish hole 



HSS Type Annular Mag Drill Hole Raptor Broach Cutter Short

RAP360, Multi-Tooth Cutter, Short Series, 36mm x 25mm, 10 Teeth, M2 High Speed Steel

These strong raptor cutters provide an accurate and simple way of cutting a wide range of materials compared with conventional twist drills or other drill bits. 

Features and Benefits 
• A precise, easier, and efficient way of cutting materials 
• Less time-consuming compared with conventional twists frills or drill bits 
• The friction is reduced between the HSS core drill and the material 

Applications 
• For use with all magnetic drilling and cutting applications 
• Designed to be used on a wide range of industries including construction, railways, fabrication, engineering, and mining 


Standard cutter, 19-50mm 

RAP400 40.00mm STANDARD CUTTER

RAP500 50.00mm STANDARD CUTTER

These strong raptor M2 HSS cutters provide an accurate and simple way of cutting a wide range of materials compared with conventional twist drills or other drill bits. 

Features and Benefits 
• A precise, easier, and efficient way of cutting materials 
• Less time-consuming compared with conventional twists frills or drill bits 
• The friction is reduced between the HSS core drill and the material 

Applications 
• For use with all magnetic drilling and cutting applications 
• Designed to be used on a wide range of industries including construction, railways, fabrication, engineering, and mining 


Multi-Tooth Cutter 

RAPL220 22.00mm L/S CUTTER

Unibor

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 30mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4inch Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor® geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 30mm Depth

Multi-Tooth Cutter, Short Series, 10mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 11mm x 30mm, HSS M2

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 50mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4" Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 50mm Depth

Multi-Tooth Cutter, Long Series, 12mm Cutting Diameter x 50mm Cutting Depth, HSS M2

Multi-Tooth Cutter, Long Series, 14mm x 50mm, HSS M2

Multi-Tooth Cutter, Short Series, 15mm x 30mm, HSS M2

Multi-Tooth Cutter, Long Series, 16mm Cutting Diameter x 50mm Cutting Depth, HSS M2

Multi-Tooth Cutter, Short Series, 16mm x 30mm, HSS M2

Multi-Tooth Cutter, Long Series, 17mm x 50mm, HSS M2

Multi-Tooth Cutter, Short Series, 17mm x 30mm, HSS M2

Multi-Tooth Cutter, Long Series, 18mm x 50mm, HSS M2

Multi-Tooth Cutter, Long Series, 19mm x 50mm, HSS M2

Multi-Tooth Cutter, Long Series, 20mm Cutting Diameter x 50mm Cutting Depth, HSS M2

Multi-Tooth Cutter, Short Series, 20mm x 30mm, HSS M2

Multi-Tooth Cutter, Long Series, 22mm x 50mm, HSS M2

Multi-Tooth Cutter, Short Series, 23mm Cutting Diameter x 30mm Cutting Depth, HSS M2

Multi-Tooth Cutter, Short Series, 24mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 33mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 42mm x 30mm, HSS M2

Multi-Tooth Annular Cutters

Rotabroach

RAP360, Multi-Tooth Cutter, Short Series, 36mm x 25mm, 10 Teeth, M2 High Speed Steel

17 Variations

Rotabroach

RAP400 40.00mm STANDARD CUTTER

2 Variations

Rotabroach

RAP500 50.00mm STANDARD CUTTER

2 Variations

Rotabroach

RAPL220 22.00mm L/S CUTTER

8 Variations

Unibor

Multi-Tooth Cutter, Short Series, 10mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 11mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 12mm Cutting Diameter x 50mm Cutting Depth, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 14mm x 50mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 15mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 16mm Cutting Diameter x 50mm Cutting Depth, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 16mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 17mm x 50mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 17mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 18mm x 50mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 19mm x 50mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 20mm Cutting Diameter x 50mm Cutting Depth, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 20mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Long Series, 22mm x 50mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 23mm Cutting Diameter x 30mm Cutting Depth, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 24mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 33mm x 30mm, HSS M2

51 Variations

Unibor

Multi-Tooth Cutter, Short Series, 42mm x 30mm, HSS M2

51 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB