Flawfinders

Lubricants & Chemicals

container_type

product_type

size

brand

categoryId

stockStatus

Detection Fluids

Solent Maintenance

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. 

Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant.  SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Features and Benefits
• Detects flaws during manufacture or on site
• 3 part system, cleaner, dye penetrant and developing fluid
• Developing fluid reacts with highly sensitive red dye to display flaws in the weld
• Can be used to inspect welds, alloys or standard metals
• Supplied in a 500ml ozone-friendly aerosol

Typical Applications
• Welding 
• Metalwork


Flaw Detector Dye Penetrant Spray, 500ml

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

SF3-500B, Flawfinder Developer, Aerosol, 500ml

Ambersil

Quick drying solvent cleaner/degreaser and excess penetrant remover for the non-destructive testing of metal surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer. Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, colored traces of the penetrant.

Once applied and left for at least 7 minutes, the developer enhances and makes each trace of penetrant visible.

Features and Benefits
• High contrast and easy to use 
• Can identify defects as small as 20μm
• Easy to remove via 'cleaner'

Typical Applications
• Detects cracks, lack of fusion, and open cavities in welded parts
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchanges
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics

Flaw Detector Developer, No.3, 400ml

No.3, Flawfinder Developer, Aerosol, 400ml

Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

Flaw Detector Cleaner No.1 from Ambersil is fast drying cleaner for the removal of all kinds of contaminants on the surface to be inspected. It also serves purpose as a surface preparation spray for inspection. 

Features and Benefits
• For as a preparation of the surface before inspection with dye penetrant
• Drys rapidly, leaving surfaces clean
• Removes surface contamination including, metal working fluid, anti-corrosion coatings, oil & grime

Typical Applications
• Welding
• Cracks and cavities
• Porosity checks

Warning
• Flammable - Aerosol, contains solvents

Flaw Detector Cleaner No.1, Aerosol 400ml

No.1, Flawfinder Cleaner, Aerosol, 400ml

Red coloured, water washable penetrant for non-destructive testing of metal surfaces. The penetrant wicks into tiny flaws within 10 minutes and excess penetrant should be removed before using the developer.

Features and Benefits
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics
• Detects cracks, lack of fusion, and open cavities in welded parts
• Highly visible red dye that is very easy to use and cost effective
• Wicks in to defects down to 20μm
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchangers

Typical Applications
• Fault detection
• Metalwork
• Piping
• Ceramics


Flaw Detector Penetrant, No.2, 400ml

No.2, Flawfinder Penetrant, Aerosol, 400ml

Rocol

FLAWFINDER DEVELOPER is an aerosol applied white powder which is designed to draw the penetrant out of a flaw, and enhance the definition, to facilitate detection when used in conjunction with FLAWFINDER DYE PENETRANT and FLAWFINDER CLEANER SPRAYS.

Crack Detection Developer Spray
FEATURES AND BENEFITS:
    Highly absorbent white film for rapid results
    Highlights very fine cracks
    Sharp indication and geometry of defect to the naked eye
    Suitable for pressure testing & leak detection


Flawfinders

Solent Maintenance

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

3 Variations

Solent Maintenance

SF3-500B, Flawfinder Developer, Aerosol, 500ml

3 Variations

Ambersil

No.3, Flawfinder Developer, Aerosol, 400ml

Solent Maintenance

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

3 Variations

Ambersil

No.1, Flawfinder Cleaner, Aerosol, 400ml

Ambersil

No.2, Flawfinder Penetrant, Aerosol, 400ml

Rocol

Flawfinder Developer, Aerosol, 400ml

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Flawfinders

Solent Maintenance

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

3 Variations

Solent Maintenance

SF3-500B, Flawfinder Developer, Aerosol, 500ml

3 Variations

Ambersil

No.3, Flawfinder Developer, Aerosol, 400ml

Solent Maintenance

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

3 Variations

Ambersil

No.1, Flawfinder Cleaner, Aerosol, 400ml

Ambersil

No.2, Flawfinder Penetrant, Aerosol, 400ml

Rocol

Flawfinder Developer, Aerosol, 400ml

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB