Detection Fluids

Flawfinders

Leak Detectors

Lubricants & Chemicals

container_type

product_type

size

brand

categoryId

stockStatus

newProduct

Loctite

8040
Releases rusted, corroded and seized components by shock-freezing effect. Released 
parts remain lubricated and protected from corrosion.

Remove stubborn corroded and seized on components with Loctite Freeze & Release anti-seize lubricant spray. Formulated to chill components down to -43°C, the spray penetrates microscopic cracks in the rust and allows the lubricant in to make lighter work of disassembly. The lubricant also helps protect against further corrosion. 

Features and Benefits
• Easy to apply via elongated spray nozzle
• Chills rusted and seized components down to -43°C 
• Lubricant penetrates deep into microscopic cracks allowing easy disassembly
• Helps protect fastenings from further corrosion

Typical Applications
• Automotive industry
• Agricultural 
• Mechanical
• Construction


8040 Freeze & Release Lubricating Aerosol, 400ml

8040, Freeze & Release Spray, Aerosol, 400ml

Solent Maintenance

Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. 

Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant.  SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Features and Benefits
• Detects flaws during manufacture or on site
• 3 part system, cleaner, dye penetrant and developing fluid
• Developing fluid reacts with highly sensitive red dye to display flaws in the weld
• Can be used to inspect welds, alloys or standard metals
• Supplied in a 500ml ozone-friendly aerosol

Typical Applications
• Welding 
• Metalwork


Flaw Detector Dye Penetrant Spray, 500ml

SF1-500, Flawfinder Cleaner, Aerosol, 500ml

White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

SF3-500B, Flawfinder Developer, Aerosol, 500ml

Ambersil

Quick drying solvent cleaner/degreaser and excess penetrant remover for the non-destructive testing of metal surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer. Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, colored traces of the penetrant.

Once applied and left for at least 7 minutes, the developer enhances and makes each trace of penetrant visible.

Features and Benefits
• High contrast and easy to use 
• Can identify defects as small as 20μm
• Easy to remove via 'cleaner'

Typical Applications
• Detects cracks, lack of fusion, and open cavities in welded parts
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchanges
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics

Flaw Detector Developer, No.3, 400ml

No.3, Flawfinder Developer, Aerosol, 400ml

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

SF2-500B, Flawfinder Penetrant, Aerosol, 500ml

Water based formulation, no oils, silicones or harmful solvents; no run-off hazard.
Non-flammable and completely odourless.
Highlights all leaks even under low pressure.
Stable, does not break down in use.
Removes the need for sophisticated electronic equipment or immersion tanks.
Fitted with 360 degree spray system for all angle use.
Aerosol meets DIN 30657.
Aerosol meets the requirements of BS EN 14291:2004.
Can be used on oxygen systems.

Highly visible and easy to use gas leak detector for pipe and joints from Ambersil. Its water-based formula is food industry safe and contains no oils, silicone or solvents, resulting in no hazardous run-off. It's non flammable odourless formula makes it the safe choice for gas pipes. 

Features and Benefits
• Water-based formulation with no oils, silicone, solvents and no 'run-off' hazards
• Non-flammable and odourless
• Oxygen system safe

Typical Applications
• HVAC installations

Notes
• Meets BS EN 14291:2004, and can be used for VOSA MOT testing

Gas Leak Detector, Water Based, Food Safe, 400ml

Leak Detector, Aerosol, 400ml

Action Can

Action Can LD-90 is a professional-grade gas leak detector designed to identify gas and air leaks in pipework, valves, and fittings. It is water-based and non-flammable, formulated without solvents, silicones, or oils. LD-90 quickly and safely detects leaks, including nonvisible ones, even on low-pressure systems. This product offers reliable leak detection without leaving any residue, ensuring the safety and efficiency of gas systems in various applications.

Features and Benefits
• Use to trace leaks for all types of gases, forms highly visible bubbles

Typical Applications
• Suitable for use by heating engineers to check that gas pipes are sealed and there are no appearances of leaks

Standards
• Conforms to BS EN 14291:2004 (VOSA MOT Testing) and MIL-L-25567 (oxygen system compatibility)

LD-90 Gas Leak Detector

LD-90 GAS LEAK DETECTOR TWIN SPRAY

Ambersil Freezer Spray is a versatile rapid cooling agent designed for fault finding in electronic components, cooling thermally sensitive parts during soldering or calibration, and instant fault detection on printed circuit boards, transistors, resistors, and condensers. By spraying directly onto the suspect component, users can confirm defects, facilitating efficient replacements. This spray is also useful for shrink fitting metal assemblies and aiding the removal of hard, sticky substances like chewing gum. Ambersil Freezer Spray is a valuable tool for electronics maintenance, repair, and various industrial applications.

Features and Benefits
• Rapidly reduces component temperature by up to -50°C
• Non-flammable
• Non-toxic
• Completely odourless
• Can be used to cool thermally sensitive parts during soldering or calibration
• Size: 400ml

Typical Applications
• Electronic equipment
• Printed circuit boards
• Transistors
• Resistors
• Condensers
• Intermittent dry joint connectors

Approvals
• Rail Approved product (007/020505)

Flaw Detection Freezer Spray

Freezer/2, Freezer Spray, Aerosol, 400ml

Flaw Detector Cleaner No.1 from Ambersil is fast drying cleaner for the removal of all kinds of contaminants on the surface to be inspected. It also serves purpose as a surface preparation spray for inspection. 

Features and Benefits
• For as a preparation of the surface before inspection with dye penetrant
• Drys rapidly, leaving surfaces clean
• Removes surface contamination including, metal working fluid, anti-corrosion coatings, oil & grime

Typical Applications
• Welding
• Cracks and cavities
• Porosity checks

Warning
• Flammable - Aerosol, contains solvents

Flaw Detector Cleaner No.1, Aerosol 400ml

No.1, Flawfinder Cleaner, Aerosol, 400ml

Red coloured, water washable penetrant for non-destructive testing of metal surfaces. The penetrant wicks into tiny flaws within 10 minutes and excess penetrant should be removed before using the developer.

Features and Benefits
• Discontinuities, laps, folds and cracks in castings, forgings and ceramics
• Detects cracks, lack of fusion, and open cavities in welded parts
• Highly visible red dye that is very easy to use and cost effective
• Wicks in to defects down to 20μm
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Check for porosity or leaks in pipes, tanks, boilers, heat exchangers

Typical Applications
• Fault detection
• Metalwork
• Piping
• Ceramics


Flaw Detector Penetrant, No.2, 400ml

No.2, Flawfinder Penetrant, Aerosol, 400ml

Johnson & Allen

Neocol B is a black magnetic ink uses the highest grade of magnetic particles in order to give defined indications. These magnetic particles were chosen for their low coercivity and response to very low magnetic fields.

Features and Benefits
• Capable of finding indications of all sizes and shapes 
• Suitable for use in all conditions without the need for UV or darkness lights
• Aerosol design for easy use
• Suspended particles are highly sensitive to magnetic fields producing particle accumulation  around areas of defect due to flux leakage produced by them
• Uses a propellant of CO2 which gives an excellent propellant to active product ratio when compared to liquid propellants like Isobutane, Propane and Butane
• Great surface wetting and particle mobility to maximise detection of defect 
• Produces clear indication when used with Neopaint-2 , Neopaint NPT16 or ECO-2 white contrast paints

Typical Applications
• Inspection of welds
• Pressure vessels
• Structures
• Pipes
• Castings
• Forgings
• Most other ferromagnetic components.

Approvals
• Certified to meet Sulphur and Halogen levels required by military, nuclear and ASME standards

Neocol B, Magnetic Ink, Black, 400ml

NEOCOL B BLACK MAGNETIC INK 400ml

Rocol

Leak detector spray is a specially formulated fluid which has been designed to identify leaks or bleeding on even the smallest, pressure positive metallic or plastic pipes or fittings.

Features and Benefits
• Leaves a thin film of surface-active agents that accurately identify any bleeding or leakage
• Non Corrosive
• Low Chlorine content
• 360° valve for use in difficult to reach areas

Typical Applications
• Pipework carrying natural gas and LPG
• Most positive pressure gas systems
• Safe for use with refrigerant gases

Leak Detector Spray, 300ml

Leak Detector, Can, 300ml

A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.

SL1-400A is a high performance, specially formulated white fluid, designed specifically to identify even the smallest gaseous leaks. This leak detector spray applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints. Bubbles in the applied film indicate the location of the leak.

Features and Benefits
• Aerosol enables fast and easy application
• The pressure will not not drop off due to CO2 degradation during storage offering a longer shelf life

Typical Applications
• Compressed air
• Acetylene
• Butane
• Propane
• Chlorine
• Hydrogen
• Natural gas

Notes
Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway

Detection Fluids

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Detection Fluids

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB