General Welding

Accessory Kits

Clean Air Filter Units

Drying Ovens

Flux

Fume Extractors

Furnaces

Pipe Marker

Solders

Welding Blankets

Welding Cables

Welding Curtains

Welding Table

Welding, Brazing & Soldering

application

capacitykg

colour

compatible_pipe_diameterin

diametermm

external_depth

external_height

external_width

fuel_type

heightm

heightmm

material

material_thicknessmm

material_weightgm

maximum_operating_temperaturec

melting_rangec

minimum_operating_temperaturec

package_type

product_material

product_type

sheath_colour

sheath_material

size

suitable_for

type

voltagev

widthin

widthm

widthmm

withstand_temperatures_up_toc

brand

categoryId

stockStatus

This 6ft x 6ft x 6ft Welding Booth comes supplied with both Frames and Curtains to effectively protect the user against heat and sparks when welding. The curtains are manufactured from a Hi-Vis orange PVC and comply to EN1598.

Features and Benefits
• Each section easily slides in for locking
• No tools required for assembly
• Pipe joints have screwless push-fit snap locks
• Made of 1 inch (25mm) round tube
• Supplied in a single carton

Typical Applications
• Welding
• Soldering

Standards
• EN1598

Welding Booth, Frames & Curtains

1457 - Welding Booth EN 1598 With Frames & Curtain. 6ft x 6ft x 6ft

Antox

For the treatment of corrosion on stainless steel and nickel alloys prior to welding. Brush not supplied.

Designed to remove oxide scale and tarnish around welding points, Antox® 71E Picking Paste does the job in up to 60 minutes. Approved by the KWU, this solution can also be used on Titanium, Nickel, and their alloys.

Features and Benefits
• Ideal for removing annealing colours and weld burn
• Supplied in a corrosion-safe storage tub
• Treats rusty and acid-resistant steels prior to welding

Warning
• User must wear chemical-resistant PPE (EN 374 / EN166 / DIN EN 13034)
• Use in a well-ventilated area or with suitable respiratory equipment (B-P3 filter type)
• Acutely toxic and can cause severe burns - use with caution

Stainless Steel Pickling Paste

71E Picking Paste, 2kg

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.

Effective flux paste for engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution. Suitable for use with lead and lead free soldering.

Features and Benefits
• Water soluble for easy cleaning after use
• Suitable for lead and lead free soldering for versatility of use

Fluxite Soldering Paste

Flux Tin, 100g

Flux Tin, 450g

Kennedy

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C. 

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition). 

Supplied with steel curtain rings.

Available in a range of sizes and colours.

PVC curtains for suspension from curtain poles. Standard sized curtains with snap-fasteners on both sides for joining to obtain total desired width. 
Supplied with reinforced holes in the upper edge and steel suspension rings.

All standard curtains are made of pliable, self-extinguishing PVC material with flash point 320° - 390°C. 

EN1598 for welding (fulfilling requirements 
on transmittance, reflectance, UV-stability 
and resistance to ignition).

PVC Welding Curtains

1300x1800mm AMBER HI-VIS PVC WELDING CURTAIN

Antex

Tip tinner is a speedy and effective product for cleaning and re-tinning de-wetted soldering irons that cannot be re-tinned by sponges, pads or rosin cored solder wire.

In simple terms - If your soldering iron tip won't take solder, try using tip tinner to restore life back into your tip.

Simply wipe your soldering iron tip across the surface of the product, then apply solder. Give your tip a wipe on a sponge, and it should then be ready for use again.

• Suitable for use with all Antex soldering irons / tips.
• RE- energizes your soldering bit.



XM000Y0 - Tip Tinner/Cleaner - 15g

Lead Free Solder - Handy Pack

Lead free Silver solder or Copper solder
Silver content solders have a lower melt point and give a low resistance solder joint

A range of lead-free solders supplied in handy sized dispensers. The 0.8mm solder wire is quick melting, easy to use, and ideal for use on micro electronics, fine wires, and most other electrical / electronic soldering operations.

• 4m x 0.8mm diameter Lead free Solder wire.
• Melting Point +227°C.
• Percent Tin 99.25%.
• Percent Copper 0.75%.
• Flux Content 2.5%.
• Product Weight 13g

Electronics 0.80mm Wire Lead Free Solder, +227°C Melting Point.


Electronics 0.80mm Wire Lead Free Solder, +227°C Melting Point, 0.75% Copper, 99.25% Tin, 4mtr,13g

Bullfinch

The Bullfinch No.1365 Unilow Furnace is robustly designed with a wide low frame that gives great stability and safety. It incorporates an advanced design of air intake adjustment to give a wide range of flames from vigorous to soft - and more precise control of the heat. The burner design prevents jets becoming blocked by spillage, stripping, bbq lighters and tile/label removal.

Furnace, robustly designed with a wide low frame that gives great stability and safety. It incorporates an advanced design of air intake adjustment to give a wide range of flames from vigorous to soft - and more precise control of the heat. The burner design prevents jets becoming blocked by spillage. The furnace generally heats compounds to about 600°C. Made for the melting of lead and other metals, compounds and bitumen.

No.1365 - Unilow Furnace 

Central Metals and Alloys

General Purpose 60% tin, 40% lead. Melting range 183 - 188°C. 
Complies to CN29453, QQS571E, BS 219 and DIN 1707. 1/2lb sticks. 
Blowpipe Solder: 40% tin, 60% lead. Engineering grade Cp. (Pk 10).
Electrical Solder: 60% tin, 40% lead. Electrical grade K. (Pk 10).

Elevate your soldering experience with the Tinman's solder, boasting an engineering Grade C classification and a composition crafted from 40% tin and 60% lead. Engineered with a relatively low melting temperature, this solder is tailor-made for extensive solder joint work. Its trapezoidal shape ensures precision and high-quality soldering, catering specifically to professional settings. This top-tier solder is designed for use on non-ferrous materials, delivering exceptional performance and reliability in every application. Choose Tinman's solder for a seamless and efficient soldering experience in your professional projects.

Features and Benefits
• Possesses an engineering Grade C making it ideal for most general purpose applications
• Trapezoidal shape allows for better flow and paste release for a higher quality solder
• With a relatively high tensile strength to produce lasting joints

Typical Applications
• Ideal for large solder joint work such as uses on sheet metal, wiping and joining lead pipes, cable sheaths, radiator cores and heating units

Warnings
• Product restricted to professional users 

General Purpose Grace C Solder Stick (1/2lb)

General Purpose Tinmans Solder Grade C - 1/2LB Stick

(Unbranded)

Blowpipe 40% tin, 60% lead. Engineering grade C. (Pack 10).
For sheet metal, solder pot dip soldering, wiping and joining of lead pipes and stained glass work.
Complies to BS219.

Blowpipe 60% tin 40% lead. Engineering grade K. (Pack 10).
For soldering non-ferrous metal, Copper, Stainless Steel, Brass, Zinc and high quality sheet metal work. Also for electronic assemblies and solder pot filling. Grade K solder is used for more critical temperature soldering than for example Grade C.
Complies to BS219.

Please Note: Product "Restricted to Professional Users"
 


General Purpose Blowpipe Solder 

Blowpipe Solder 40% Tin, 60% Lead. Engineering Grade C - Pack 10.

Blowpipe Solder 60% Tin, 40% Lead. Engineering Grade K - Pack 10.

Inexpensive tool for marking straight lines around pipe or use as a straight
edge. Made from flexible gasket material with good resistance to high temperatures. 

WRAP-A-ROUND MARKERS - GREY

J1868- WRAP-A-ROUND MARKERS - GREY - Pipe Diameter 3"-10" (L)

J1869- WRAP-A-ROUND MARKERS - GREY - Pipe Diameter 4"-12" (XL)

Weldability Sif

Depth of undercut, excess weld metal (capping size), fillet leg length, fillet weld throat size, angle of preparation (0° to 60°, missalignment high-low).

MasterGage® products permit quick and accurate measuring of the most popular weld fillet sizes in inch and metric. The MG-8 Cam Type Gauge measures the depth of undercut, excess weld metal (capping size), fillet leg length, fillet weld throat size and angle of preparation (0° to 60°, misalignment high-low). The MG-11 Weld Fillet Gauge is designed to permit quick and accurate measuring of weld fillet sizes in imperial sizes 1/8" - 1" and metric 3.2 - 25.4mm. All sizes and numerals are laser etched into the surface for clarity and easier reading. Excellent for checking alignment and inspection of various angles of welds, the product possesses high quality stainless steel (SUS 304) blades to resist rust and for longer life. Blades are deburred for fine and smooth edges. All sizes and numerals are laser etched into the surface for clarity and easier reading. Comes in a handy vinyl pocket case with snap lock.

Features and Benefits
• Available as either a fillet gauge or cam-type weld gauge to suit your needs
• Sizes and measurements are laser etched onto the product surface for easy and instant measuring
• Manufactured from high quality stainless steel which is durable and resistant to rust for overall product longevity
• Supplied in a vinyl pocket case to keep your accessory protected and stored safely
• Deburred edges provide an accurate and precise edge

Typical Applications
• Welding

Weld Gauges

MASTERGAGE CAM-TYPE WELD GAUGE

Supplied to any length in multiples of 1m.

Single core, high flexibility cable. BS EN 60228:2005.

PVC Single Insulated Cable

1006 16mm CABLE-BLACK PVC (METRE)

1008 35mm CABLE-BLACK PVC (METRE)

1009 50mm CABLE-BLACK PVC (METRE)

1010 70mm CABLE-BLACK PVC (METRE)

The flame retardant PVC curtains deliver protection against fire when welding. Available in two colours and sizes, they are the cost effective and simple way to ensure the safety of yourself, other personnel and your surroundings. For use with a welding curtain frame (sold separately).

Features and Benefits
• Manufactured from PVC for product durability and resilience
• Available in varying sizes and colours to suit your needs
• Simple yet effective way of protecting yourself and others when welding

Typical Applications
• Welding

Standards
• Conform to EN1598

Notes
• Images are for illustration purposes only, some products may appear darker than the images

Welder's Curtains


Welding Curtain, PVC, Orange, 1800mm x 1800mm

Available in a 6'0" x 6'0" and 8" x 6" size, these green, flame retardant fibreglass curtains are the ideal way to keep you safe whilst welding at high temperatures. They can be hung from SWP curtain frames (sold separately). 

Features and Benefits
• Manufactured from a tested, flame retardant canvas to protect you whilst working
• Available in two sizes to ensure you choose the product that best suits your needs

Typical Applications
• Ideal for hanging from welding curtain frames in order to protect yourself and others whilst welding at high temperatures

Green Canvas Welding Curtain

Welding Curtain, Fibreglass - Flame Retardent, Green, 1800mm x 1800mm

Welding Curtain, Fibreglass - Flame Retardent, Green, 1800mm x 2500mm

Welding Curtain, PVC, Green, 1800mm x 1800mm

Welding Curtain, PVC, Green, 1800mm x 2500mm

Constructed from steel, these welding curtain frames provide the basis for which you can affix your welding curtain. Available in either 6'0" x 6'0" or 8" x 6" depending on your requirements, when used in conjunction with SWP welding curtains (sold separately), they provide efficient protection against heat and flames when welding.

Features and Benefits
• Manufactured from durable steel to ensure product longevity
• Available in two sizes to allow you to choose the product that best suits your needs

Typical Applications
• Ideal for hanging flame retardant material sheets from in order to protect yourself and others whilst welding at high temperatures

Notes
• Self assembly required

Welder's Curtain Frames

Welding Curtain Frame Only, Steel, Black, 1800mm x 2400mm

For use with canvas and PVC welders curtains. Rings supplied separately.

For use with canvas and PVC welders curtains, these steel curtain rings are a simple way of fixing the curtain to the frame.

Features and Benefits
• Manufactured for use with SWP® canvas and PVC welding curtains
• Steel construction offers durability

Typical Applications
• For use with SWP® canvas or PVC welding curtains

General Welding

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

General Welding

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB