Mechanical Hazard Gloves

Personal Protection & Clothing

coating

colour

en388

en388_abrasion

en388_cut_coup_test

en388_cut_tdm_test_iso_13997

en388_puncture

en388_tear

size

brand

categoryId

stockStatus

newProduct

Hand Protection

Ejendals

8127 - Tegera 
High quality knitted cotton glove, with vinyl grip points. Extremely flexible. Flexible stripe for a superb fit. Chain stitched for better durability. Silicon-free. For assembly work where a good grip and very high levels of fingertip sensitivity are required.
Added surface to provide extra grip during application.
CAT I


These high-quality cotton gloves are used widely for assembly tasks. Complete with vinyl dots, they provide an excellent grip and are especially useful for precision work.

Features and Benefits
• Extremely flexible for reduced hand fatigue during prolonged wear
• Chain stitched for durability and good quality
• Silicone-free to prevent product contamination
• Soft blend of materials prevents blisters and grazes while keeping hands clean

Typical Applications
• Automotive
• Picking and packing
• Assembly 

Standards
• CE Category I
• EN 420:2003 + A1:2009

Approvals
• EU Regulation 2016/425


Tegera® 8127 General Handling Gloves

8127 Tegera, General Handling Gloves, White, PVC Coating, Cotton Liner, Size 10

Skytec

Aria
Multi-functional gloves. Enhanced lifecycle through increased resistance to abrasion and tearing. Excellent grip in wet, dry and oily environments. Seamless nylon/spandex liner. To EN388:2003 Cat II.

Aria™ Multi-functional gloves with nylon/spandex liner and nitrile coating that offers wearers excellent abrasion resistance and protection from mechanical hazards.

Features and Benefits
• Excellent grip even in wet, dry and oily environments
• Seamless nylon/spandex liner offers superior dexterity and comfort 
• Enhanced life cycle through increased resistance to abrasion and tearing
• Engineered anatomically for maximum fit
• Antimicrobial Sanitized® finish provides extra freshness
• Black/Grey
• Coating material: Nitrile
• Seamless nylon/spandex liner 
• Coating coverage: Palm side
• Lining material: Nylon
• Cuff type: Elasticated with knit wrist
• Length: 22.5-24.5cm


Approvals
• An Oeko-Tex™ certified product
• CAT II EN388: 2016, 4, 1, 3, 1, X

Typical Applications
• Automotive
• Logistics
• Maintenance
• Manufacturing
• Oil and gas
• Utilities
• Assembly
• Handling
• Warehousing
• Light fabrication
• Quality inspection

Aria™ Nitrile Coated Gloves, Mechanical Hazard, Grey/Black

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 10

56-425 Maxidry
¾ coated, ultra-lightweight Nitrile dual coated grip gloves designed to provide comfort, grip and protection in oily and dirty precision handling tasks.
Conforms to EN 388 4121.
CAT II

This oil-repellent Maxi-Dry® glove is an ultra-lightweight solution to working in oily and wet conditions. Designed to maintain dexterity, these gloves are ideal for precision handling tasks, with the nitrile coated palm offering comfort, grip, and hand protection against dirt and oil.  

Features and Benefits
• Silicone-free and suitable for painting industries
• Pre-washed prior to packaging for guaranteed fresh gloves with each new pair
• 3/4 coated knit wrist for maximum protection
• Palm thickness: 1.30mm for enhanced protection
• Machine washable at max. 60°C, prolongs glove life

Standards
• EN 388:2016 + A1:2018 4.1.2.1.A.
• EN ISO 21420:2020

Approvals
• Dermatologically accredited by the Skin Health Alliance
• Certified by Oeko-Tex®

56-425 MaxiDry GP Palm-side Coated Black/Purple Gloves

56-425 MaxiDry® Liquitech Mechanical Hazard Gloves, Black/Purple, Nylon Liner, NBR (Nitrile Butadiene Rubber) Coating, EN388: 2016, 4, 1, 2, 1, A, Size 9

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 8

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 9

Halo

These Foam Nitrile Coated Palm Cut A Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

Available in a wide range of sizes, these foam nitrile coated palm gloves offer a cut A protection, but are mostly suited for general handling tasks. Designed for durability and comfort with wearability at the forefront of the construction.

Features and Benefits
• 13 gauge nylon liner is comfortable and offers cut level A protection
• Foam nitrile coated palm allows you to grip even oily and greasy components
• Knitted elasticated cuff reduces the risk of dirt and debris from entering the glove
• Flexible design maintains dexterity, conformability and comfortability
• Seamless design reduces risk of skin irritation when used extensively
• Available in an array of sizes to ensure you find the best fit

Standards
• Halo® products are BSI tested
• EN 388:2016  4.1.2.1.A.
• EN 407:2004 X1XXXX
• CAT II

Foam Nitrile Coated Palm Cut A Gloves

Mechanical Hazard Gloves, Black/Red, Nylon Liner, Nitrile Foam Coating, EN388: 2016, 4, 1, 2, 1, A, Size 8

Polyco

Matrix P Grip™
Seamless knitted black nylon glove with polyurethane palm coating. Easy to wear over long periods of time. Flexible polyurethane coating. Seamless construction is comfortable on the hands. Manufactured to CE EN388.
Applications include: 
assembly, electronics, light engineering, component handling. 
Added surface to provide extra grip during application.
Conforms to BS EN388 3.1.3.1
CAT II. 


The highly durable Matrix® P Grip Glove is made with a seamless knitted liner with a polyurethane palm coating. Offering excellent abrasion and tear-resistant qualities, these gloves are ideal for a range of tasks, including precision work and general handling. 

Designed to be worn as a single glove solution, they are also suitable as a glove liner if the wearer thinks it necessary. 

Features and Benefits
• Ergonomic design provides a high level of dexterity
• Flexible and tactile for user comfort and freedom of movement
• Elasticated wrist band offers a secure fit to keep out dust and dirt 

Typical Applications
• Construction
• Automotive 
• Assembly 
• Utility
• Joinery
• Plumbing
• Mechanical work and inspection

Standards
• CE PPE Cat. II
• EN388:2016

Matrix® P Palm-side Coated Gloves

403-MAT Matrix Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 3, 1, 3, 1, X, Size 9

These Nitrile Palm Coated Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

Available in an array of sizes, these nitrile palm coated cut resistant gloves possess a liner that is manufactured from recycled plastic bottles, keeping you safe, comfortable and helping the planet at the same time.

Features and Benefits
• 15 gauge liner is manufactured from recycled plastic bottles to reduce your carbon footprint whilst retaining comfort
• Nitrile coated palm allows for dexterity even when handling oily or greasy components
• Elasticated cuffs effectively hold the gloves in place as well as working to prevent dirt and debris from ingressing
• Touchscreen compatible so there is no need to remove the glove when operating phones, tablets or other touchscreen devices
• Available in a variety of sizes to ensure you find the right fit

Standards
• Halo® products are BSI tested
• EN 388:2016 4121X
• EN 407:2004 X1XXXX
• EN 420:2003+A1:2009

Nitrile Palm Coated Gloves with a Sustainable Liner

Mechanical Hazard Gloves, Black/White, Recycled Polyester/Spandex Liner, Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 11

These 18 Gauge Sandy Nitrile Coated Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

Available in a wide range of sizes, these 18 gauge gloves are designed to offer you protection when working, as well as being comfortable even with sustained wear. Finished with a sandy nitrile coated palm to bolster grip.

Features and Benefits
• 18 gauge liner offers comfort as well as dexterity
• Sandy nitrile coated palm ensures excellent range of movement and grip when handling oily and greasy products
• Elasticated cuffs hold the gloves in place when in use and also prevent dirt and debris from ingressing
• Available in a range of sizes to ensure you find the right fit

Standards
• Halo® products are BSI tested
• EN 388:2016 4.1.2.1.X (plus add shield)
• EN 420:2003+A1:2009

18 Gauge Sandy Nitrile Coated Gloves

Mechanical Hazard Gloves, Grey/Black, Nylon/Spandex Liner, Sandy Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 9

These Seamless PU Coated Palm Cut 1 Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

Designed for comfort and dexterity when wearing, these seamless polyurethane palm coated gloves are suited for general handling tasks. Available in a wide range of sizes so you can ensure that everyone is protected. 

Features and Benefits
• Flexible 13 gauge nylon liner allows for optimum dexterity and comfort
• Polyurethane (PU) coated palm provides excellent grip
• Seamless design reduces the likelihood of skin irritation with extended use
• Designed for comfortability and conformability
• Available in a variety of sizes to ensure you find the right fit for you

Standards
• Halo® products are BSI tested
• EN 388:2016  4.1.2.1
• EN 407:2004 X1XXXX
• EN 420:2003 + A1:2009
• CAT II

Mechanical Hazard Gloves

Ejendals

8127 Tegera, General Handling Gloves, White, PVC Coating, Cotton Liner, Size 10

4 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 10

4 Variations

Atg

56-425 MaxiDry® Liquitech Mechanical Hazard Gloves, Black/Purple, Nylon Liner, NBR (Nitrile Butadiene Rubber) Coating, EN388: 2016, 4, 1, 2, 1, A, Size 9

5 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 8

4 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 9

4 Variations

Halo

Mechanical Hazard Gloves, Black/Red, Nylon Liner, Nitrile Foam Coating, EN388: 2016, 4, 1, 2, 1, A, Size 8

6 Variations

Polyco

403-MAT Matrix Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 3, 1, 3, 1, X, Size 9

16 Variations

Halo

Mechanical Hazard Gloves, Black/White, Recycled Polyester/Spandex Liner, Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 11

6 Variations

Halo

Mechanical Hazard Gloves, Grey/Black, Nylon/Spandex Liner, Sandy Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 9

6 Variations

Halo

Mechanical Hazard Gloves, Red/Grey, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 2, 1, Size 10

6 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Mechanical Hazard Gloves

Ejendals

8127 Tegera, General Handling Gloves, White, PVC Coating, Cotton Liner, Size 10

4 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 10

4 Variations

Atg

56-425 MaxiDry® Liquitech Mechanical Hazard Gloves, Black/Purple, Nylon Liner, NBR (Nitrile Butadiene Rubber) Coating, EN388: 2016, 4, 1, 2, 1, A, Size 9

5 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 8

4 Variations

Skytec

Aria Mechanical Hazard Gloves, Black/Grey, Spandex/Nylon Liner, Nitrile Coating, EN388: 2016, 4, 1, 3, 1, X, Size 9

4 Variations

Halo

Mechanical Hazard Gloves, Black/Red, Nylon Liner, Nitrile Foam Coating, EN388: 2016, 4, 1, 2, 1, A, Size 8

6 Variations

Polyco

403-MAT Matrix Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 3, 1, 3, 1, X, Size 9

16 Variations

Halo

Mechanical Hazard Gloves, Black/White, Recycled Polyester/Spandex Liner, Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 11

6 Variations

Halo

Mechanical Hazard Gloves, Grey/Black, Nylon/Spandex Liner, Sandy Nitrile Coating, EN388: 2016, 4, 1, 2, 1, X, Size 9

6 Variations

Halo

Mechanical Hazard Gloves, Red/Grey, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 2, 1, Size 10

6 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB