Turning Inserts

Cutting Tools

cutting_direction

cutting_edge_lengthmm

insert_size

insert_style

iso_category_grade

manufacturer_grade

material

pack_quantity

shape

brand

categoryId

stockStatus

newProduct

Turning

Kennametal

DCMT Turning Inserts

55° Rhombic Insert 

Insert Grade KC5010
(P10-P20)(M10-M20)(K10-K20)(N10-N20)(S10-S20)
PVD coated insert ideal for finishing to general machining of most workpiece materials at higher speeds. Excellent for machining most steels, stainless steels, cast irons, non-ferrous materials and super alloys under stable conditions. It also performs well machining hardened and short chipping materials.

Chipbreaker: LF. Application - Finish 

DCMT Turning Inserts Grade KC5010

DCMT 11T302LF, Turning Insert, Grade KC5010, Carbide, 55° Rhombic

Tungaloy

Suitable for External/Internal Toolholders.

DNMG Turning Inserts

55° Rhombic Insert 

Insert grade T9115
ISO Range - (P10-P20)
Coating Layers: CVD Al2O3/TiCN
CVD Al2O3/TiCN coated grade for steel



DNMG Turning Inserts Grade T9115

DNMG 150608-TM INSERT GRADE T9115

CNMG Turning Inserts

80­° Rhombic Insert 

Insert Grade KCM35
(P35-P45)(M30-M40)
A multilayer TiN-MT-TiCN-Al2O3 CVD coating over a super-tough substrate. The KCM35 grade is engineered to take on the most brutal cast stainless steel machining applications. The substrate withstands heavy interruptions, while the coating provides the wear resistance needed for long tool life. The polished surface resists edge build-up, even at slow cutting speeds. KCM35 grade is available in insert sizes and geometries appropriate for heavy feeds and large depths of cut.

Chipbreaker: MP. Application Medium 
Chipbreaker: RP. Application  Roughing 

CNMG Turning Inserts Grade KCM35

CNMG 120408MP, Turning Insert, Carbide, 80° Rhombic, TiN-MT-TiCN-Al2O3, Grade KCM35

Yamaloy

Grades:
QX520  (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

Chip Breaker: PM. Application: Med Cut.

DCMT Turning Inserts 

55° Rhombic Insert

Insert Grades QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PM. Application: Med Cut.

DCMT Turning Inserts Grade QX520

DCMT 070204-PM, Turning Insert, Grade QX520, Carbide, 55° Rhombic

Iscar

TNMG TF Turning Inserts Grade IC90 feature a tough sub-micron substrate, suitable for low-to-medium cutting speeds. For machining of heat resistant alloys, austenitic stainless steel and hard steel.

Features and Benefits
• Tough submicron substrate for added hardness
• PVD TiAlN+TiN coating for enhanced heat and wear resistance
• TF chipbreaker for use at slow to medium cutting speeds

Standards
• Insert Grade IC907
• ISO Range - (P10-P30)(M05-M20)(K15-K30)(H05-H15)(S05-S20)(N05-N20)



TNMG Turning Inserts Grade IC907

TNMG 160408-TF, Turning Insert, Grade IC907, Carbide, Triangle

TPMR Turning Inserts 

60° Triangular Insert 

11° positive relief angle insert, for semi-finishing and finishing of most materials. 


Insert Grade IC20N
ISO Range - (P05-P25)(M05-M15)
Coating - Uncoated
A cermet grade for turning and grooving and ecommended for semi-finishing and finishing operations, wear resistant. 






TPMR Turning Inserts Grade IC20N

TPMR 160304, Turning Insert, Grade IC20N, Carbide, Triangle

CCMT

Grade KC850
M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate. For heavy cutting of low,medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes this grade ideally suited for difficult interrupted cuts.

CCMT LF turning inserts grade KC850 (M25-M45)(P25-P45) feature a tri-phase coating on an extra strong, cobalt-enriched substrate. For heavy cutting of low,medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes this grade ideally suited for difficult interrupted cuts.

Features and Benefits
• Tri-phase coating on an extra strong, cobalt-enriched substrate
• For heavy cutting of low,medium, and high carbon steels, as well as medium hardness alloy and tool steels
• Excellent thermal and mechanical shock resistance

Typical Applications
• Finishing

Notes
• Sold in packs of 5

Standards
• Grade KC850

CCMT LF Turning Inserts Grade KC850

CCMT 09T308LF, Turning Insert, Grade KC850, Carbide, 80° Rhombic

TCMT
Suitable for External/Internal Toolholders.

TCMT Turning Inserts

60° Triangular Insert 

Insert Grade KC850
(M25-M45)(P25-P45). A tri-phase coating on an extra strong, cobalt-enriched substrate. For heavy cutting of low,medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes this grade ideally suited for difficult interrupted cuts.

Chipbreaker: LF. Application - Finish 

TCMT Turning Inserts Grade KC850

TCMT 16T308LF, Turning Insert, Grade KC850, Carbide, Triangle

Mitsubishi

Grade

MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high efficiency machining.

MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons.

Chipbreaker

*General

TPMR Turning Inserts

60° Triangular Insert

MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons.


TPMR Turning Inserts Grade MP3025

TPMR 110304, Turning Insert, Grade MP3025, Cermet, Triangle

Pramet

CNMG insert for use with DCLN, PCBN, PCKN and PCLN holders and bars.

CNMG Indexable Lathe Tools Insert

CNMG 120408E-FM, Turning Insert, Carbide, Grade 9325

The single-sided 80° rhombic turning insert offers a cutting-edge solution for precision in fine to medium machining of steels. Crafted from grade T8430 and PVD-coated fine-grained WC-Co carbide excels in diverse turning operations.  

Features and Benefits
• Smooth machining enabled by narrow negative T-land, ensuring cutting-edge strength under common working conditions
• 3-D chip-breaker ensures effective chip-breaking control across a wide range of feeds and depths, enhancing machining versatility
• Wide chip groove enhances chip control, improving evacuation in the machining of tough materials
• WC-Co-based substrate, submicron-grained, offers high hardness, abrasive wear resistance, and comb crack resistance
• PVD coating enhances resistance to thermal cracking and performs well in operations with fluctuating cutting temperatures
• Multi-layered PVD coating features a thick TiN layer for crater wear resistance and a hard AlTiN layer for flank wear resistance
• Unique Titanium-Boron-Nitride (TiBN) top layer reduces build-up edge, enhancing overall performance

Typical Applications
• Steel
• Stainless steel

80° Rhombic Turning Insert, Grade T8430, CCMT

CCMT 09T304E-FM INSERT GRADE T8430

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum).

These CCGT Turning Inserts are 80° rhombic in shape and grade K10. Manufactured from carbide, each turning insert is uncoated and can be used in combination with a high rake geometry for machining Cast Irons, Aluminium, Plastics and other soft Non-Ferrous materials.

Features and Benefits
• Available in an array of sizes
• AL Chip Breaker effectively allows the insert to remove materials
• Manufactured from carbide for durability

Typical Applications
• Suited for machining Cast Irons, Aluminium, Plastics and other soft Non-Ferrous materials

CCGT Turning Inserts, Grade K10

CCGT 120404-AL, Turning Insert, Grade K10, Carbide, 80° Rhombic

CCGT Turning Inserts

80° Rhombic Insert

Insert Grade QX520 
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.


Chip Breaker: PF. Application: Finish.


CCGT Turning Inserts Grade QX520

CCGT 060204-PF, Turning Insert, Grade QX520, Carbide, 80° Rhombic

CCGT 09T304-PF, Turning Insert, Grade QX520, Carbide, 80° Rhombic

Grades:
QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

Chip Breaker: PM. Application: Med Cut.	

CCMT Turning Inserts 

80° Rhombic Insert

Insert Grade QX5030 
(ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.


Chip Breaker: PM. Application: Med Cut.

CCMT Turning Inserts Grade  QX5030

CCMT 060204-PM, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

CCMT 09T304-PM, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

CCMT Turning Inserts 

80° Rhombic Insert

Insert Grade QX500
(ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.


Chip Breaker: PM. Application: Med Cut.

CCMT Turning Inserts Grade QX500

CCMT 09T308-PM, Turning Insert, Grade QX500, Cermet, 80° Rhombic

Grades:
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + 
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR9. Application: Rough.

CNMG Turning Inserts

80° Rhombic Insert

Insert Grade QX5030
(ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.


Chip Breaker: NM6. Application: Med Cut.


CNMG Turning Inserts Grade QX5030

CNMG 120408-NM6, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

Chip Breaker: PF. Application: Finish.
Chip Breaker: AL. Application: Med Cut (Alum).

These DCGT 55° rhombic turning inserts are grade K10 (ISO K10) uncoated. Used in combination with a high rake geometry for machining aluminum, plastics and other soft non-ferrous materials. With an AL Chipbreaker suted for medium cuts of aluminium.

Features and Benefits
• Available in a variety of sizes and specifications to suit your needs
• Uncoated
• AL chipbreaker suited for medium cuts of aluminium

Typical Applications
• Used in combination with a high rake geometry for machining aluminum, plastics and other soft non-ferrous materials

DCGT Turning Inserts, Grade K10

DCGT 070204-AL, Turning Insert, Grade K10, Carbide, 55° Rhombic

Grades:
QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.
QX8010 (ISO M10 S10) Coated. Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Chip Breaker: NF3. Application: Finish.
Chip Breaker: NSA. Application: Light Cut.
Chip Breaker: NSS. Application: Light/Med Cut.
Chip Breaker: NM4. Application: Med Cut.
Chip Breaker: NM5. Application: Med Cut.
Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: ST. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough.


DNMG Turning Inserts 

55° Rhombic Insert

Insert Grade QX5020
(ISO P10-P35 M10-M30 K10-K30) CVD Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
 

Chip Breaker: NM4. Application: Med Cut.


DNMG Turning Inserts Grade QX5020

DNMG 110408-NM4, Turning Insert, Grade QX5020, Carbide, 55° Rhombic

Grades:
QX520  (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.

Chip Breaker: R11. Application: Rough.

KNUX Turning Inserts 

55° Parallelogram Insert

Insert Grade QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: R11. Application: Rough.

KNUX Turning Inserts Grade QX520

KNUX 160405-R11, Turning Insert, Grade QX520, Carbide, 55° Parallelogram

Grades:
QX520  (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX530 (ISO P25-P35 M15-M25) Coated.- Turning grade for Steels, Cast Steels and Stainless Steels. A good general purpose Steel grade for roughing.
QX5030 (ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

Chip Breaker: NM6. Application: Med Cut.
Chip Breaker: NM7. Application: Med/Rough.
Chip Breaker: NR8. Application: Rough.
Chip Breaker: NR9. Application: Rough.

SNMG Turning Inserts 

Square Insert

Insert Grade QX5030
(ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.

Chip Breaker: NM6. Application: Med Cut.


SNMG Turning Inserts Grade QX5030

SNMG 120408-NM6, Turning Insert, Grade QX5030, Carbide, Square

Grades:
QX500 (ISO P10-P25) Cerment. For high speed finishing and light cutting. Will remain a high class surface finish. Mainly used on steels and can be applied to finish some Stainless steels and Cast Irons.
QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated.An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PM. Application: Med Cut.

TCMT Turning Inserts

60° Triangular Insert

Insert Grades QX520
(ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

Chip Breaker: PM. Application: Med Cut.

TCMT Turning Inserts Grade QX520

TCMT 110204-PM, Turning Insert, Grade QX520, Carbide, Triangle

Suitable for Internal/External Toolholders

TNMG Turning Inserts

60° Trianglar Insert

Insert Grade QX5030
(ISO P20-P40 M20-M30) CVD Coated. - Medium / rough turning and intermediate cutting of steel / stainless steel. Combination of toughest substrate and alumina coating (MT-TiCN + TiC + AL2O3 + TiN) having superior chipping resistance provide wide coverage.


Chip Breaker: NM6. Application: Med Cut.


Turning Inserts

Kennametal

DCMT 11T302LF, Turning Insert, Grade KC5010, Carbide, 55° Rhombic

2 Variations

Tungaloy

DNMG 150608-TM INSERT GRADE T9115

Kennametal

CNMG 120408MP, Turning Insert, Carbide, 80° Rhombic, TiN-MT-TiCN-Al2O3, Grade KCM35

Yamaloy

DCMT 070204-PM, Turning Insert, Grade QX520, Carbide, 55° Rhombic

2 Variations

Iscar

TNMG 160408-TF, Turning Insert, Grade IC907, Carbide, Triangle

4 Variations

Iscar

TPMR 160304, Turning Insert, Grade IC20N, Carbide, Triangle

Kennametal

CCMT 09T308LF, Turning Insert, Grade KC850, Carbide, 80° Rhombic

6 Variations

Kennametal

TCMT 16T308LF, Turning Insert, Grade KC850, Carbide, Triangle

3 Variations

Mitsubishi

TPMR 110304, Turning Insert, Grade MP3025, Cermet, Triangle

9 Variations

Pramet

CNMG 120408E-FM, Turning Insert, Carbide, Grade 9325

Pramet

CCMT 09T304E-FM INSERT GRADE T8430

3 Variations

Yamaloy

CCGT 120404-AL, Turning Insert, Grade K10, Carbide, 80° Rhombic

8 Variations

Yamaloy

CCGT 060204-PF, Turning Insert, Grade QX520, Carbide, 80° Rhombic

2 Variations

Yamaloy

CCGT 09T304-PF, Turning Insert, Grade QX520, Carbide, 80° Rhombic

2 Variations

Yamaloy

CCMT 060204-PM, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

2 Variations

Yamaloy

CCMT 09T304-PM, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

2 Variations

Yamaloy

CCMT 09T308-PM, Turning Insert, Grade QX500, Cermet, 80° Rhombic

4 Variations

Yamaloy

CNMG 120408-NM6, Turning Insert, Grade QX5030, Carbide, 80° Rhombic

2 Variations

Yamaloy

DCGT 070204-AL, Turning Insert, Grade K10, Carbide, 55° Rhombic

5 Variations

Yamaloy

DNMG 110408-NM4, Turning Insert, Grade QX5020, Carbide, 55° Rhombic

2 Variations

Yamaloy

KNUX 160405-R11, Turning Insert, Grade QX520, Carbide, 55° Parallelogram

Yamaloy

SNMG 120408-NM6, Turning Insert, Grade QX5030, Carbide, Square

Yamaloy

TCMT 110204-PM, Turning Insert, Grade QX520, Carbide, Triangle

Yamaloy

TNMG 160404-NM6, Turning Insert, Grade QX5030, Carbide, Triangle

5 Variations

Yamaloy

TNMG 220408-NM6, Turning Insert, Grade QX5030, Carbide, Triangle

5 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB