Test Gauges & Accessories

Coordinate Measuring Machines

Dial Gauges

Instrument Stands

Measuring & Test Equipment

accuracymm

anvil_diameter

base_size

dial_diametermm

graduationsmm

heightmm

indicator_diametermm

magnetic_pullkg

material

measuring_rangemm

product_type

resolutionmm

shank_diametermm

spigot_sizemm

stem_diametermm

system_of_measurement

thread_size

travelmm

type

brand

categoryId

stockStatus

Magnetic Stands

Kennedy

With two magnetic faces and large vee. Medium duty special clamp with fine adjustment.
Mounts: 1/4" I/D lug, dovetail stem/spigot diameter: 5/16".
Base dimensions: 60 x 50 x 55mm.
Column height x diameter: Up to 280 x 15mm.
Clamp hole: 8mm.
Magnetic pull: 50kg.

Mag elbow joint stand with a magnetic pull of 50kg. Designed for medium duty special clamp with fine adjustment.

Features and Benefits
• Two magnetic faces that are powerful 
• Lever switchable
• Fully adjustable joints
• Large slotted 'V' groove for versatility

Notes
• Mounts: 1/4in. I/D lug, dovetail stem/spigot 
• Diameter: 5/16in.
• Base dimensions: 60 x 50 x 55mm
• Column height x diameter: Up to 280 x 15mm
• Clamp ring: 6.35mm

Lever Switchable Elbow Joint 2 Mag Stand

2 MAG ELBOW JOINT STAND

Dial Test Indicators

Oxford

32mm Diameter Dial Lever Type
Supplied with dovetail fitting and 6 and 8mm spigot. Matt finish chromed housing.

Easy Read Dial Test Indicators

LEVER DIAL GAUGE 0.8mmx0.01mmx0-40-0

Conical precision plug-in mechanism. Insulated, no electrical conductivity. Designed-in nominal fracture point.

Conical precision plug-in mechanism designed for use with the Kennedy 3D Axis Gauge (KEN3022010K). The stylus is designed to break on a 'nominal fracture' before the workpiece or tester can be damaged. The unit is insulated with no electrical conductivity.

Features and Benefits
• Compatible with Kennedy 3D Axis Gauge (KEN3022010K)
• Designed to break on a 'nominal fracture' to ensure no damage to workpiece or unit
• Insulated to ensure no electrical conductivity

Typical Applications
• Testing

Stylii

Spare Short Stylus To Suit Kennedy 3D Analogue Tester

The Kennedy® switchable universal magnetic stand has two high strength magnetic faces one with a large vee to allow it to be position and fastened to curved surfaces. The clamps can be set at any position along the column and cross bar allowing the DTI to be positioned exactly where you require it.

Clamping mounts: 1/4" I/D lug. stem/spigot diameter: 1/8", 1/4", 5/16", 3/8".
Base diameter: 60x50x55mm.
Column height x diameter: 175x12mm.
Crossbar length x diameter: 165x10mm.
Magnetic pull: 50kg.

Lever Switchable Universal 2 Mag Stand features two magnetic faces and large vee. Its heavy duty construction makes it ideal for workshop and general maintenance useage.

Features and Benefits
• Heavy duty construction for increased durability
• 2 magnetic faces for 4 secure posistioning
• Magnetic faces feature a pull of up to 50kg

Specifications
• Mounts: 1/4" I/D lug, stem/spigot diameter: 1/4" and 1/8"
• Column height x dia.:175 x 12mm
• Crossbar length x dia.: 165 x 10mm
• Clamp ring: 6.35mm
• Magnetic pull: 50kg
• Base dimensions:  60 x 50 x 55mm

Typical Applications
• Warehouse
• Maintenance

Lever Switchable Universal 2 Mag Stand

2 MAG UNIVERSAL STAND

Easy Read Dial Gauges and DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, 'Easy Read' dial for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. 

Features and Benefits
• Shockproof mechanisms for stability and durability
• 'Easy Read' dial for convenience 
• Durable matt finish chromed housing and black oxidised limit hand 
• Fitted with 1/4" inside diameter centre back lug and 5/16" diameter stem
• Fitted case for easy storage and portability





Easy Read Dial Gauges Plunger Type

PLUNGER DIAL GAUGE 25x0.01mmx0-100

Magnetic Stand Fitments

Fitted as standard to KEN-333-2110K. 
To suit 1/4" I/D lug, dovetails, stem/spigot diameter 5/16".
3 point adjustable column: 15mm x 280mm max. 
Threaded: M8 x 1.25mm.

All main columns are threaded M8 x 1.25mm and are interchangeable with Kennedy, Oxford, Mitutoyo etc. base units except mini-mag (M6 x 1mm) also suitable for incorporating into special fixtures or threaded pot magnets.

Medium Duty Fitment - 3 Point
Fitted as standard to KEN- 333-2110K.
3 point adjustable column: 15 x 280mm max.
Threaded: M8 x 1.25mm.
Clamp hole: 8mm.

Magnetic Stand Fitments - Medium Duty Fitment, 3 Point

3-POINT MAG MEDIUM DUTY FITMENT

Lever type, two magnetic faces and large vee. With universal clamp.
Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.
Base dimensions: 60 x 50 x 55mm.
Column height x dia.: 175 x 12mm.
Crossbar length x dia.: 165 x 10.0mm.
Clamp ring: 6.35mm.
Magnetic pull: 50kg.

This universal clamp stand boasts two magnetic faces, a lever type action and a large vee structure. Complete with a large base for stability.

Features and Benefits
• Boasts two magnetic faces for multiple uses
• Large vee structure for stability
• Universal clamp for a wide variety of holding applications

Typical Applications
• Manufacturing
• Laboratories

Specifications
• Mounts: 1/4in. I/D lug, stem/spigot diameter: 1/4in. and 1/8in.
• Column height x dia.:175 x 12mm
• Crossbar length x dia.: 165 x 10mm
• Clamp ring: 6.35mm
• Magnetic pull: 50kg
• Base dimensions:  60 x 50 x 55mm

Universal 2 Mag Stand

UNIVERSAL 2 MAG STAND

The Kennedy® 'Smile-Dial' plunger type dial gauge has an easy to read 58mm (2,1/4") diameter dial with a matt finish chromed housing and black oxidised limit hands. The mechanism is jewelled to ensure a smooth precise action. Fitted to the back of the 'Smile-Dial' is an off-set lug with 1/4" inside diameter and a 5/16" diameter stem fixing. Manufactured to BS 907.

Graduation: 0.1mm.
Travel: 10mm.
Reading: 0-100.

This smile dial plunger type gauge is comprised of a matt finish chromed housing and black oxidised limit hands. The product is jewelled and fitted with 1/4in. inside diameter centre back lug and a 5/16in. diameter stem.

Features and Benefits
• Limit hands are black oxidised for durability
• Matt finish chromed housing is highly resilient
• Jewelled
• Fitted with 1/4in. inside diameter centre back lug and 5/16in. diameter stem

Typical Applications
• Maintenance

Smile Dial Plunger Type Gauge

'SMILE DIAL' PLUNGER TYPE DIAL GAUGE JEWELLED

32mm (11/4") diameter dial lever type, supplied with dovetail fitting and 6 and 8mm spigot. Matt finish with a chromed housing. Jewelled.

Features and Benefits
• Dial lever type for easy and convenient readings
• Supplied with dovetail fitting (6 and 8mm spigot)
• Matt finish chromed housing
• Jewelled 

Easy Read Anti-Magnetic Dial Test Indicators

LEVER DIAL GAUGE 0.8x0.01mmx0-40-0 JEWELLED

Dial Test Indicator Accessories

Carbide Steel. Replacement stylus for all Kennedy lever type dial test indicators (except dual reading stylus for KEN-300-4000K). N.B. Dial guage not included.

Replacement styli for Kennedy lever type dial test indicators. Carbide Steel.

301-963 - Stylus to suit old style metric types only.

301-986 - Stylus to suit new style metric types only.

301-986 - Stylus to suit old style imperial types only.




Replacement Stylus

IMPERIAL STYLUS TO SUIT EASY READ LEVER D.T.I

METRIC STYLUS TO SUIT EASY READ LEVER D.T.I

The New Generation of NC axis gauging equipment, for quick, accurate setting of all three axes (X, Y, Z) by analogue differential indicator. Suitable for all machine tools with CNC, NC or DRO and also for EDM/spark erosion tools - the stylus is electrically insulated from the spindle. Universal - one tool measures length, height, diameter and centre. The synchronous single needle allows greater needle displacement before reaching ‘12 o'clock’. A positive reading is given regardless of direction of axis movement. No calculations and no ‘trial and error' involved. Increases production and efficiency, reduces job time and operator requirement. The stylus is designed to break on a ‘nominal fracture' before the workpiece or tester can be damaged. Three plug in styli types can be changed in seconds without the use of special tools. 
Pre-adjusted to a concentricity of 0.01mm maximum.
Indicator diameter: 50mm.
Clamping shank diameter: 16mm.

a. Measuring length
b. Measuring height
c. Establishing true centre and diameter of bores.
Insert stylus roughly in centre of bore, measure distance A and divide by 2 (P). Measure distance B in Y direction, across point P and divide by 2.
Result: true centre point (M). 
Repeat measuring of distance A.

The Kennedy 3D Analogue Tester is a versatile tool designed for quick and accurate setting of all three axes (X, Y, Z) through an analogue differential indicator. It is suitable for use with all machine tools featuring CNC, NC, or DRO, as well as EDM/spark erosion tools, with the stylus electrically insulated from the spindle. This universal tool can measure length, height, diameter, and center, offering flexibility for various applications. The synchronous single needle allows greater needle displacement before reaching '12 o'clock', providing a positive reading regardless of the direction of axis movement. With no calculations and no 'trial and error,' this tester increases production and efficiency, reducing job time and operator requirements. The stylus is designed to break on a 'nominal fracture' before damaging the workpiece or tester, ensuring safety. Additionally, three plug-in styli types can be changed in seconds without the need for special tools, enhancing convenience and versatility.

Features and Benefits
• Pre-adjusted to a concentricity of 0.01mm maximum
• Indicator diameter: 50mm
• Clamping shank diameter: 16mm

3D Analogue Axis Gauge Tester

3D ANALOGUE TESTER

With two magnetic faces and large vee. Heavy duty with universal clamp and fine adjustment.
Mounts: 1/4" I/D lug, stem/spigot diameter: 4mm, 8mm, 3/8" without bush.
Base dimensions: 60 x 50 x 55mm.
Column height x dia.: 175 x 12mm.
Crossbar length x dia.: 165 x 10mm.
Clamp ring: 6.35mm.
Magnetic pull: 50kg.

Kenendy Lever Switchable Fine Adjustable 2 Mag Stand

2 MAG FINE ADJUSTING STAND

Compact in design, this stand still has a magnetic pull of 40kg with positive switching, fully adjustable joints and slotted 'V' groove.

Compact in design, this stand still has a magnetic pull of 30kg with positive switching, fully adjustable joints and slotted 'V' groove.

Lever Switchable Mini Elbow Joint 2 Mag Stand

2 MAG MINI ELBOW JOINT STAND

This large stand still has two powerful magnetic faces producing a magnetic pull of 80kg. It has positive switching, fully adjustable joints and slotted 'V' groovefor versatility.

Large stand with two powerful magnetic faces producing a magnetic pull of 80kg. 
Positive switching, fully adjustable joints and slotted 'V' groove for versatility.

Typical Applications
• Lever type for easy and stable adjustment
• Fully adjustable joints and slotted 'V' groove for excellent posability
• Magnetic pull of 80kg for greater hold and stability

Notes
• Mounts: 1/4" I/D lug, dovetail stem/spigot diameter: 5/16"
• Base dimensions: 60 x 50 x 55mm
• Column height x dia.: up to 300 x 17mm


Lever Switchable Large Elbow Joint 2 Mag Stand

2 MAG LARGE ELBOW JOINT STAND

Magnetic Bases

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K two magnetic faces, bottom and back face. Large vee for curved surfaces.
Threaded: M8 x 1.25mm.
Base dimensions: 60 x 50 x 55mm.
Magnetic pull: 50kg.

Fitted as standard to KEN- 333-2030K, - 2050K and - 2110K, this lever type base boasts two magnetic faces as well as a large vee for curved surfaces. The base has a magnetic pull of 50kg and is threaded to size M8 x 1.25mm.

Features and Benefits
• 2 magnetic faces; one on the bottom and one on the back
• Large vee for curved surfaces
• Threaded M8 x 1.25mm allowing you to attach a stand (sold separately)

Typical Applications
• Laboratory

Lever Type Base, 50kg

50KG MAG LEVER TYPE BASE

Dovetail Mounting Accessories

1/4" SPIGOT WITH 8mm STEM

Spares to suit Kennedy/Oxford Dial Test Indicators

Spares

32mm CRYSTAL FACE FOR LEVER TYPE GAUGE

Mitutoyo

39mm Diameter Face
Large dial face for easy reading with the installed 2mm (.08") diameter point carbide tipped. These indicators are ruggedly housed within a satin chrome finished case. Bezel and dial are adjustable for easy zero setting with fully jewelled movements. Automatic reversible contact point is adjustable through 240°. The precision miniature pivot bearings give a frictionless movement of the contact point. One piece bezel of crystal design ensures resistance to water and dust.

Clock Only

Dial Test Indicator Series 513 Sets

513-404-10T DIAL INDICATOR SET

Flexible magnetic stand with precision smooth segments linked by a steel cable. Locked in position by lever at the bottom of base. On/off lever releases magnet. 
Suitable for stem diameter 6 and 8mm. Column: 16mm dia. x 335mm.

Mitutoyo Flexi-Stand

7012-10 FLEXIBLE MAGNETIC STAND

Digital Indicators

The Oxford Precision high-performing digital indicator is a precision instrument known for its accuracy and user-friendly features. With a large digital LCD display, it provides clear and easy-to-read measurements. The soft-key touch ensures operator comfort, making it suitable for extended use. Crafted with superior construction quality, this digital indicator offers reliability and durability. Key features include inch/metric conversion, zero reset, and an auto power-off function, enhancing convenience and efficiency in various measurement applications. Whether you require precise measurements in inches or metric units, this digital indicator delivers accuracy and ease of use for a wide range of tasks.

Features and Benefits
• Accurate tool
• Large, 7.5mm LCD display
• High construction quality
• Soft-keys for ease of use
• Response speed: 0.5m/s
• Travel: 12.7mm/0.5"
• Resolution: 0.01mm/0.0005"

Typical Applications
• Provides precise metric measurements in any applicable industry or environment

Digital Indicator

0-12.7mm/0.5" DIGITAL INDICATOR 0.01mm/0.0005"

Verdict

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180° of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (metric) or 1/4” (inch) diameter spigot.

Verdict ‘Rapid’ Dial Test Indicators

01/3130 T30MM RAPID DIALT EST INDICATOR

Baty

58mm (2 1/4”) Diameter Dial FM/FI Series
Precision plunger dial indicators are suitable for various applications in the workshop or inspection department. All units are supplied with 8mm stems, 3mm diameter carbide ball anvil and standard offset lug backplate.
Accuracy: resolution down to 0.001mm. Calibration certificate supplied with all indicators reading better than 0.1mm.

Test Gauges & Accessories

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Test Gauges & Accessories

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB