Materials

Chalk & Plasticine

Engineering Materials

Ground Flat Stock

Key Steel

Packing Shim

Rubber Sheeting

Sand

Silver Steel

Materials, Maintenance & Standard Parts

application

colour

diameter

height

length

lengthmm

mat_material

material

material_form

matting_type

overall_lengthm

overall_thicknessmm

overall_widthm

product_type

specification

thickness

thicknessmm

width

widthmm

brand

categoryId

stockStatus

Artus

Provides controlled thickness spacing, electrical insulation and sealing. With colour-code chart for fast thickness identification by the colour. Used in numerous applications and industries providing differing performance characteristics than metal, e.g. folding endurance, chemical resistance, tensile strength to break, etc. 
Size: 150 x 600mm.
Contents: (1 of each): 0.025, 0.038, 0.050, 0.075, 0.100, 0.125, 0.190, 0.250, 0.380, 0.500 and 0.750mm.

Containing eleven sheets of packing shim, this assorted pack of durable plastic shim can adapt to your needs. Providing controlled thickness spacing, electrical insulation and sealing, this packing shim is impervious to rust and oil. Each product is colour coded to indicate their thickness with a standard width of 150mm and a length of 600mm. Plastic packing shim can easily be cut into your desired size with ordinary scissors. 

Features and Benefits
• Colour coded for ease of identification when selecting the correct shim
• Plastic material allows for folding endurance and resistance to breakage making it a durable product
• Resistant to chemical corrosion
• The wide variety of sizes within the pack allow you to select the correct size packing shim to suit your requirements

Typical Applications
• For use when leveling doors, windows and glazing as well as various kinds of machinery

Plastic Shim Pack, Metric Sizes

Plastic Shim, 0.025mm - 0.750mm, 150x600mm, Pack of 11

Contents: (1 of each): 0.025mm, 0.038mm, 0.050mm, 0.075mm, 0.100mm, 0.125mm, 0.190mm, 0.250mm,.0.380mm, 0.500mm & 0.750mm.

Provides controlled thickness spacing, electrical insulation and sealing. With colour code chart for fast thickness identification by the colour. Used in numerous applications and industries providing differing performance characteristics than metal, e.g. folding endurance, chemical resistance, tensile strength to break, etc.  Size: 150mm x 600mm.

Assorted Plastic Shim Pack

ARTUS ASSORTED COLOUR CODED PLASTIC SHIM

Coba

General-purpose grade for water service and dilute chemicals. Low cost waterproof seals, gaskets. 68° shore A hardness. Tensile strength at break: 3.0 Mpa. Elongation at break: 200%.

This range of rubber sheeting is general-purpose grade and is suited for use with  water service and dilute chemicals. Available in a range of sizes, the product can be used to make low cost waterproof seals and gaskets.

Features and Benefits
• Versatile grade rubber sheeting, often used in marine applications as well as for general purpose workplace applications
• Ideal for low cost waterproof seals and gaskets
• 68 degrees shore A hardness
• Available in a variety of sizes to suit your exact needs
• Tensile strength at break: 3.0 Mpa
• Elongation at break: 200%

Typical Applications
• Institutional
• Industrial
• Plumbing
• Automotive

Commercial Rubber Sheeting

1.4Mx1Mx1.5mm COMMERCIAL RUBBER SHEET BLACK

1.4Mx1Mx4.5mm COMMERCIAL RUBBER SHEET BLACK

1.4Mx1Mx12mm COMMERCIAL RUBBER SHEET BLACK

Good resistance to material oils, greases, dilute acids and alkalis. Good ageing and weathering properties make it suitable for outdoor applications. 65° shore A hardness. 
Tensile strength at break: 6 Mpa. 
Elongation at break: 250%.

Neoprene Rubber

1.4Mx1Mx6mm COMMERCIAL NEOPRENE SHEET BLACK

(Unbranded)

Tolerances: 
Thickness: -/+0.001". 
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

A medium alloyed oil hardening steel with excellent cutting force and toughness, excellent dimensional stability. Supplied in the annealed condition, precision tolerances provides toolmakers with a decarburization free surface, plus a high wear resistance after heat treatment, ideal for a multitude of applications: dies, press tools, punches, gauges, cams machine cutters and marking devices. Line ground all edges up to and including 2" wide in the thicknesses up to and including 1/4". All other dimensions are rotary ground on edges. All edges and ends are deburred thicknesses of 3/8" and above will be supplied with sawn ends, thinner sections are supplied with sheared ends. 
A.I.S.I. O1 GFS - 
Chemical analysis	
Carbon 	(C)	0.95% 
Silicon 	(Si)	0.25%
Manganese 	(Mn)	1.20%
Chromium 	(Cr)	0.50%
Tungsten 	(W)	0.50%
Vanadium 	(Va)	0.20%
S&P up to 0.035% maximum.
Equivalent specifications:
AISI: O1, 
Werk. No: 1.2510, 
AFNOR: 95 mcwv5, 
British Spec.: BS4659 BO1.
Inch.
Tolerances
Thickness: +/-0.001", 
Width: +0.005"/-nil, 
Length: Nominal.

Precision Ground Flat Stock - 1/8" x 18" - Gauge Plate - 01 Tool Steel

1/8"x1/8"x18" GROUND FLAT STOCK

A medium alloyed oil hardening steel with excellent cutting force and toughness, excellent dimensional stability. Supplied in the annealed condition, precision tolerances provides toolmakers with a decarburization free surface, plus a high wear resistance after heat treatment, ideal for a multitude of applications: dies, press tools, punches, gauges, cams machine cutters and marking devices. Line ground al edges up to and including 2" wide in the thicknesses up to and including 1/4". All other dimensions are rotary ground on edges. All edges and ends are deburred thicknesses of 3/8" and above will be supplied with sawn ends, thinner sections are supplied with sheared ends. 
A.I.S.I. O1 GFS - 
Chemical analysis	
Carbon 	(C)	0.95% 
Silicon 	(Si)	0.25%
Manganese 	(Mn)	1.20%
Chromium 	(Cr)	0.50%
Tungsten 	(W)	0.50%
Vanadium 	(Va)	0.20%
S&P up to 0.035% maximum.
Equivalent specifications:
AISI: O1, 
Werk. No: 1.2510, 
AFNOR: 95 mcwv5, 
British Spec.: BS4659 BO1.
Inch.
Tolerances
Thickness: +/-0.001", 
Width: +0.005"/-nil, 
Length: Nominal.

Materials

Key Information

Group Policies

© 2023 Ted. All rights reserved.