Maintenance & Repair

Engineering Coating & Repair Products

Floor & Roof Repair

Thread Repair

Window Film

Materials, Maintenance & Standard Parts

colour

container_size

container_type

drying_time_

for_use_on

insert_length

lengthm

product_type

thread_size

widthmm

brand

categoryId

stockStatus

Devcon

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable.
Compressive strength: 57N/mm2.

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

To be cured at room temperature and used as a steel filler, this grey plastic steel putty allows you to efficiently plug cracks or breakages where you would not be able to repair them by brazing or soldering. With the ability to bond to metals, concrete, and some plastics, it's a versatile product. It's also resistant to rust, oil, petrol, water and chemicals and is machinable. Available in two varying sizes to suit your needs and possesses a mix ratio of 2.5:1.

Features and Benefits
• Resistant to a host of materials including rust, oil, petrol, water and chemicals making it a robust product
• Available in two sizes depending on your needs
• Can be tapped, machined, drilled or painted once dry to suit your requirements
• Is an ideal way to repair and patch up areas that would not be able to be repaired using brazing or welding

Typical Applications
• Ideal for use in production, maintenance and many tooling applications where welding or brazing wouldn't be possible or beneficial
• Can be bonded to most metals and concrete as well as some plastics

Plastic Steel Putty (A)

Plastic Steel Putty (A), Tub, 500g

Plastic Steel Putty (A), Tub, 1kg

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Devcon high performance tooling and production epoxies provide a fast and economical method of manufacturing moulds, patterns and tools. They may be machined, drilled and tapping using conventional machine tools, while their properties allow accurate and detailed reproduction when cast over existing models.

Plastic Steel Liquid (B)
Fast-curing, self-levelling for low-cost moulds and dies. Reproduces fine detail. Excellent surface finish. Machinable to close tolerances. 

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

Tooling & Production Epoxies

500gm "B" PLASTIC STEEL LIQUID

Steel filled, fast curing epoxy putty for durable emergency repairs. Rust resistant. Bonds to steel, iron, aluminium, brass and concrete at temperatures as low as 4°C.

Compressive strength: 72N/mm2.
Max. operating temperature: 93°C.
Pot life: 5mins.
Mix ratio: 1.7:1.

Plastic Steel 5-Minute Putty (SF)

500gm "SF" PLASTIC STEEL PUTTY

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete. FDA approved.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Maintenance & Repair Epoxies

500gm "ST" STAINLESS STEEL PUTTY

Devcon precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life.

Titanium Putty (HP)
Machinable. Repairs damaged equipment in hours. Resists rust, abrasion, high temperatures and chemicals. High compression strength. 
Compressive strength: 130N/mm2. 
Max operating temperature: 177°C. 
Pot life: 21mins. 
Mix ratio: 4.30:1.

Devcon® precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life. This titanium putty is a two part epoxy compound suited for use in an array of industries. The cured finish is fully machinable and has a compressive strength of 130N/mm2. The product has a maximum operating temperature of 177°C, a pot life of 21 minutes and a mix ratio of 4.30:1.

Features and Benefits
• Cured repairs can be drilled, tapped, machined, or painted allowing the repair to work seamlessly
• The product will not rust when cured for long lasting patch repairs
• The titanium putty is resistant to abrasion, high temperatures and chemicals
• Cost effective way of repairing parts instead of having to replace them

Typical Applications
• Plumbing
• Engineering
• Construction

Standards
• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Titanium Putty

500gm TITANIUM PUTTY

Machinable. Resistant to rust, CFCs and other chemicals. Bonds to other metals and thermoset plastics. 

Max. operating temperature: 121°C.
Pot life: 60mins. 
Mix ratio: 9.0:1.

This aluminium filled epoxy putty is suitable for machinable applications, is highly resistant to rust, CFCs and other chemicals and effectively bonds to other metals and thermoset plastics.

Features and Benefits
• Rust free properties ensures a long and effective hold
• Versatile use on any aluminium casings and materials

Typical Applications
• Engineering
• Plumbing

Aluminium Putty (F)

500gm "F" ALUMINIUM PUTTY

This aluminium filled Epoxy liquid is ideal for maintenance and repair work. Widely used for making moulds, patterns, and fixings, this liquid displays excellent strength and resistance to temperature.

Features and Benefits
• Excellent for moulds and reproducing fine detail for a cost-effective repair option
• Self-levelling for ease
• Displays non-shrink behaviour for professional results

F-2 Aluminium Liquid, 500gm

Epoxy, Coating & Repair, Drum, 500gm

High-exothermic, non-rusting epoxy putty for use in wet environments and under water. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Non-rusting, applies and cures in temperatures down to 4°C.

Compressive strength: 39N/mm2.
Max. operating temperature: 93°C.
Pot life: 45mins. Mix ratio: 1.40:1.

Wet Surface Repair Putty (UW)

500gm "UW" UNDERWATER REPAIR PUTTY

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and  heat up to 120°C.

Size: 5.0ltr.

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and  heat up to 120°C.



Maintenance & Repair

Key Information

Group Policies

© 2023 Ted. All rights reserved.