Maintenance & Repair

Engineering Coating & Repair Products

Floor & Roof Repair

Window Film

Materials, Maintenance & Standard Parts

colour

container_size

container_type

drying_time_

for_use_on

lengthm

product_type

widthmm

brand

categoryId

stockStatus

Devcon

Machinable. Resistant to rust, CFCs and other chemicals. Bonds to other metals and thermoset plastics. 

Max. operating temperature: 121°C.
Pot life: 60mins. 
Mix ratio: 9.0:1.

This aluminium filled epoxy putty is suitable for machinable applications, is highly resistant to rust, CFCs and other chemicals and effectively bonds to other metals and thermoset plastics.

Features and Benefits
• Rust free properties ensures a long and effective hold
• Versatile use on any aluminium casings and materials

Typical Applications
• Engineering
• Plumbing

Aluminium Putty (F)

500gm "F" ALUMINIUM PUTTY

Araldite

This toughened epoxy paste is a beige/natural thixotropic with good gap filling properties.

Features and Benefits
• Ideal for bonding dissimilar substrates as is non sagging up to 10mm thickness
• Good resistance to chemical, water, heat and impact

Typical Applications
• Ferrous and non-ferrous metals
• Glass fibre reinforced polymer

Epoxy Paste, 50ml

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable.
Compressive strength: 57N/mm2.

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

To be cured at room temperature and used as a steel filler, this grey plastic steel putty allows you to efficiently plug cracks or breakages where you would not be able to repair them by brazing or soldering. With the ability to bond to metals, concrete, and some plastics, it's a versatile product. It's also resistant to rust, oil, petrol, water and chemicals and is machinable. Available in two varying sizes to suit your needs and possesses a mix ratio of 2.5:1.

Features and Benefits
• Resistant to a host of materials including rust, oil, petrol, water and chemicals making it a robust product
• Available in two sizes depending on your needs
• Can be tapped, machined, drilled or painted once dry to suit your requirements
• Is an ideal way to repair and patch up areas that would not be able to be repaired using brazing or welding

Typical Applications
• Ideal for use in production, maintenance and many tooling applications where welding or brazing wouldn't be possible or beneficial
• Can be bonded to most metals and concrete as well as some plastics

Plastic Steel Putty (A)

Plastic Steel Putty (A), Tub, 500g

Plastic Steel Putty (A), Tub, 1kg

Fast-curing, self levelling for low-cost moulds and dies.Reproduces fine detail.Excellent surface finish.Machinable to close tolerances.
Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Devcon high performance tooling and production epoxies provide a fast and economical method of manufacturing moulds, patterns and tools. They may be machined, drilled and tapping using conventional machine tools, while their properties allow accurate and detailed reproduction when cast over existing models.

Plastic Steel Liquid (B)
Fast-curing, self-levelling for low-cost moulds and dies. Reproduces fine detail. Excellent surface finish. Machinable to close tolerances. 

Max. operating temperature: 121°C.
Pot life: 45mins.
Mix ratio: 9.0:1.

Tooling & Production Epoxies

500gm "B" PLASTIC STEEL LIQUID

Steel filled, fast curing epoxy putty for durable emergency repairs. Rust resistant. Bonds to steel, iron, aluminium, brass and concrete at temperatures as low as 4°C.

Compressive strength: 72N/mm2.
Max. operating temperature: 93°C.
Pot life: 5mins.
Mix ratio: 1.7:1.

Plastic Steel 5-Minute Putty (SF)

500gm "SF" PLASTIC STEEL PUTTY

Bronze-filled for refurbishing and maintaining equipment. Used on castings, bushings, shafts when brazing is not possible. Bonds to bronze, brass, ferrous metals and concrete. Easily machined, tapped and drilled. Max Operating Temperature: 121C. Pot Life: 35 minutes. Mix Ratio: 9.0:1.

Bronze Putty (BR)

500gm "BR" BRONZE PUTTY

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete. FDA approved.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Stainless Steel Putty (ST) 
Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non-ferrous metals and concrete.

Compressive strength: 58N/mm2. 
Max. operating temperature: 121°C.
Pot life: 45mins. Mix ratio: 9.0:1.

Maintenance & Repair Epoxies

500gm "ST" STAINLESS STEEL PUTTY

Devcon precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life.

Titanium Putty (HP)
Machinable. Repairs damaged equipment in hours. Resists rust, abrasion, high temperatures and chemicals. High compression strength. 
Compressive strength: 130N/mm2. 
Max operating temperature: 177°C. 
Pot life: 21mins. 
Mix ratio: 4.30:1.

Devcon® precision maintenance and repair epoxies allow fast, durable repairs to critical equipment. These are an economical way to repair and maintain a wide range of industrial equipment, improving its performance and extending service life. This titanium putty is a two part epoxy compound suited for use in an array of industries. The cured finish is fully machinable and has a compressive strength of 130N/mm2. The product has a maximum operating temperature of 177°C, a pot life of 21 minutes and a mix ratio of 4.30:1.

Features and Benefits
• Cured repairs can be drilled, tapped, machined, or painted allowing the repair to work seamlessly
• The product will not rust when cured for long lasting patch repairs
• The titanium putty is resistant to abrasion, high temperatures and chemicals
• Cost effective way of repairing parts instead of having to replace them

Typical Applications
• Plumbing
• Engineering
• Construction

Standards
• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Titanium Putty

500gm TITANIUM PUTTY

This aluminium filled Epoxy liquid is ideal for maintenance and repair work. Widely used for making moulds, patterns, and fixings, this liquid displays excellent strength and resistance to temperature.

Features and Benefits
• Excellent for moulds and reproducing fine detail for a cost-effective repair option
• Self-levelling for ease
• Displays non-shrink behaviour for professional results

F-2 Aluminium Liquid, 500gm

Epoxy, Coating & Repair, Drum, 500gm

High-exothermic, non-rusting epoxy putty for use in wet environments and under water. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Non-rusting, applies and cures in temperatures down to 4°C.

Compressive strength: 39N/mm2.
Max. operating temperature: 93°C.
Pot life: 45mins. Mix ratio: 1.40:1.

Wet Surface Repair Putty (UW)

500gm "UW" UNDERWATER REPAIR PUTTY

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and  heat up to 120°C.

Size: 5.0ltr.

Bonds to new or old concrete producing a walkable surface in eight hours. Resistant to chemicals and  heat up to 120°C.



Floor Patch

5kg FLOOR PATCH/REPAIR COMPOUND

Flexane 80: Shore 80, some flexibility. Max Operating Temperature: 82C. Pot Life: 30 minutes. Mix Ratio: 3.33:1.

Good for abrasion/tear resistant linings. Protects against vibration, shock and wear. Cost-efficient moulds (self-levelling).

Flexane 80 
Shore 80, some flexibility. 
Max. operating temperature: 82°C.
Pot life: 30mins. Mix ratio: 3.33:1. 

Flexane 94 
Shore 94, relatively rigid.
Max. operating temperature: 82°C.
Pot life: 10mins.
Mix ratio: 2.19:1.

Flexane Liquid

500gm FLEXANE 80 LIQUID

Flexane 94: Shore 94, relatively rigid. Max Operating Temperature: 82C. Pot Life: 10 minutes. Mix Ratio: 2.19:1.

500gm FLEXANE 94 LIQUID

Everbuild

Benefits:
• May be applied in damp and wet conditions.
• Formulated from lightfast acrylic polymers to withstand sunlight for longer periods than traditional bitumen coatings
• Fibre re-enforced to bridge small cracks.
• Primerless adhesion to most bituminous and non porous surfaces.


Areas For Use:
• General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions– for use on concrete, fibre/cement, roofing felt, mastic asphalt, existing bituminous roof coatings, rigid uPVC corrugated iron, metals, slates, brickwork,  tiles, lead, copper and zinc.
• Waterproofing guttering (plastic and metal), downpipes, gully’s, flashings, upstands, vents and leadwork.


The Evercryl® One Coat range of paints are the perfect solution to emergency roofing leaks. Instantly waterproof they can be applied in wet or frosty conditions (-5°C) to rapidly seal water leakages. 

Effective on all common roofing surfaces, Evercryl® can be brush applied to form a smooth and flexible waterproof membrane. Due to the high level of fibre reinforcement, Evercryl® will bridge small cracks and only requires a one coat brush application to give instant and total water protection, even in areas subject to ponding with no need for undercoating or primer on sound non-porous surfaces.

Features and Benefits
• Forms an instant waterproof barrier effectively sealing even when wet
• Can be used in both wet and frosty conditions down to -5°C
• One coat brush application for total ease of use
• High fibre reinforcement effectively seals as applied
• Available in 2.5kg and 5kg tins in a range of colours

Typical Applications
• Roofing 
• Waterproofing
• Roof maintenance
• Guttering
• Concrete 
• Metalwork
• Plastics
• Felt roofs

Warnings
• Flammable liquid

Evercryl® One Coat Paints

One Coat, Compound, Black, Tin, 2.5kg

Resin based, fibre re-enforced. Effective on all common roofing surfaces. Can be applied 
in both wet and dry conditions and may also be applied in frosty conditions down to -5°. 
Instantly waterproof. 

One Coat, Compound, Black, Tin, 5kg

One Coat,Compound, Grey, Tin, 2.5kg

Evercryl® One Coat, Compound, Grey, Tin, 5kg

One Coat, Compound, White, Tin, 5kg

Benefits:
• Easy roll out with no specialist applicator equipment required. 
• Will not creep and wrinkle after application. Stays where it is put!
• Totally waterproof.
• Protects against expensive to clean spillages from paints, varnishes etc. 
• Easily removed, will not leave a sticky residue.
• Can be left for up to 4 weeks *. 
• Safer than dust sheets.


The ultimate self adhesive glass protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work. Totally waterproof, protects against expensive to clean paint spillages on glass. Due to the adhesive face being reverse wound, easily unwinds with minimum effort and no need to bend down.

Roll & Stroll Glass Protector


GLASS PROTECTOR FILM 600mmx25M

Water Seal is a high performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebble-dashed and rendering. Based on the latest technology in silicone resins, Waterseal does not contain solvents harmful to the user or the environment and is non-flammable.

Size: 5.0ltr.

Water Seal is a high-performance transparent water repellent specially formulated to prevent water penetration on all mineral substrates such as brick, stone, concrete, pebble-dashed and rendering. Based on the latest technology in silicone resins, Waterseal does not contain solvents harmful to the user or the environment and is non-flammable.

Features and Benefits
• Improves durability and beading effect
• Can be applied using a conventional garden spray
• Can be applied to damp surfaces
• Provides between 5 - 8 m² / litre depending on porosity and nature of surfaces being treated

Water Seal

Waterseal 5ltr

Rust-oleum

Rust-Oleum Asphalt Restorer provides an 'as new' appearance that will mask old line markings and repairs and will hide ingrained dust from building works etc. 

• Upgrades drab, grey, stained asphalt. 
• Covers old line markings and repairs. 
• Avoids costly re-surfacing. 
• Usage rate: Up to 10m2 per 5 litres. 
• Size: 5 litres

Rust-Oleum® Asphalt Restorer is a one component high quality bitumen based coating with fillers and special flow additives. For refurbishing car parks, driveways and footpaths. A single application, black refurbishing coating for car parks, driveways and footpaths. 

Features and Benefits
• Upgrades drab, grey, stained asphalt and tarmac
• Provides an 'as new' appearance
• Covers old line markings and repairs
• Avoids disruptive and costly re-surfacing



5478 Asphalt Black Restorer - 5ltr

• Stands up to heavy traffic and many chemicals.
• For repairing eroded or damaged concrete, bay edges and broken steps.
• Does not shrink or crack.
• Easy all-in-1 packaging.
• For indoor and outdoor use.
• Usage rate: 5kg covers 0.6m2 (at 5mm thickness).
• Size: 5kg.


Available in two sizes, this heavy duty epoxy repair mortar is designed for repairing damaged concrete. With a dry time of 6-12 hours, the material dries in a grey colour to match most concrete. Even over time, the product stands up to heavy foot traffic and many chemicals.

Features and Benefits
• Can be used on interiors and exteriors alike
• Does not shrink or crack even over time for an accurate finish
• Stands up to heavy duty foot traffic and most commonly used chemicals
• Easy to re coat if necessary

Typical Applications
• Concrete Repairs
• Patching Stairs and Pavement

Epoxy Repair Mortar


EPOXY REPAIR MORTAR 5KG

• Stands up to heavy traffic and many chemicals.
• For repairing eroded or damaged concrete, bay edges and broken steps.
• Does not shrink or crack.
• Easy all-in-1 packaging.
• For indoor and outdoor use.
• Usage rate: 5kg covers 0.6m2 (at 5mm thickness).
• Size: 25kg.

EPOXY REPAIR MORTAR 25KG

• Cures as hard as granite.
• Can be overcoated quickly.
• Ideal for indoor and outdoor use.
• Ideal for frost-spalled concrete surfaces with exposed reinforcment.
• Can be drilled after curing.
• Easy all-in-1 packaging
• Usage rate: 10kg covers 0.5m2 at 10mm thickness

5150
Fast setting, high strength concrete repair mortar that provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, 
coving etc.

Size: 10kg and 25kg.

Maintenance & Repair

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Maintenance & Repair

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB