Parting Blades

Cutting Tools

blade_heightmm

blade_lengthmm

blade_type

insert_style

maximum_grooving_widthmm

minimum_grooving_widthmm

number_of_pockets

series

brand

categoryId

stockStatus

newProduct

Parting & Grooving

Inserts & Blades

Iscar

The Iscar TGFH part-off blade set contains: 
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

These parting and grooving blade inserts enable machining at very high feed rates, while also providing excellent straightness and a smooth surface finish. They offer a free, unobstructed chip flow as there is no upper jaw. The rigid tangential clamping in combination with the free chip flow ensures that the tool has a long product lifespan.

Features and Benefits
• Excels at machining at very high feed rates
• Consistently excellent straightness and surface finish
• Free, unobstructed chip flow
• Long product lifespan

Typical Applications
• Parting large diameter parts
• Interrupted cuts

Parting & Grooving Blades Inserts, Grade IC808

TGFH 32-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

TGFH 26-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

Self-Grip Parting & Grooving Blades
For all CNC lathes and manual lathes.
For grooves, parting off to center and chamfering.
Easy removal of inserts with extractor.
Multiple lead angles.
Chipbreaker on inserts allows for high speeds and feed rates.

Images are for illustration purposes only.

SGIH 26/32 Self-Grip Parting & Grooving Blades

SGIH-32-3 SELF-GRIP PARTING OFF BLADE

ISCAR Tang-Grip? has the following features:

? Enables machining at high feed rates and provides excellent straightness and surface finish.
? Provides a solution to the problem of inserts being pulled out during retraction. Has a solid stopper, unlike the friction retaining force in the current systems. (Especially important on machines with a bar feeder or sub spindles.)
? In the SELF-GRIP? system the machining forces are exerted on a very short stopper, while in the TANG-GRIP system, machining forces are supported by a long and rigid rear wall. Pocket wear, which occurs during machining and insert indexing in the SELF-GRIP? system, causes a reduction in the clamping force. This does not happen with the new TANG-GRIP? system.
? The TANG-GRIP? system provides very accurate grooving repeatability.
? The combination of tangential clamping and free chip flow results in improved tool and pocket life. 
? Offers a free, unobstructed chip flow. This is very important in deep grooving, since there is no upper jaw to interfere as in the other clamping systems.
 
For all technical specifications and inserts please refer to our catalogue.

Iscar blades stand out as specialized tools meticulously crafted for compatibility with TANG-GRIP single-ended inserts. Engineered with a focus on robust clamping, these blades empower machining processes at exceptionally high speeds, guaranteeing superior straightness and a polished surface finish. The intricately designed and precisely manufactured blades establish themselves as a dependable option for applications demanding high-speed machining. Their consistent performance and commitment to delivering quality results make Iscar blades a reliable and preferred choice for professionals seeking efficiency and precision in their machining endeavors.

Features and Benefits
• Very long product lifespan
• Extremely rigid clamp
• High feed rate machining
• Consistent results

Typical Applications
• Parting
• Grooving
• Ideal for large diameter and interrupted cuts

TGFH/R/L Blades

TGFH 26-4 - TANG-GRIP - TGFH/R/L Blade

SGIH-26-3 SELF-GRIP PARTING OFF BLADE

SGIH-32-4 SELF-GRIP PARTING OFF BLADE

Parting and Grooving Single-Ended Inserts for Parting Bars, Hard Materials and 
Tough Applications.

TGFH 26-2 - TANG-GRIP - TGFH/R/L Blade

TGFH 26-3 - TANG-GRIP - TGFH/R/L Blade

TGFH 32-2 - TANG-GRIP - TGFH/R/L Blade

TGFH 32-3 - TANG-GRIP - TGFH/R/L Blade

TGFH 32-4 - TANG-GRIP - TGFH/R/L Blade

DGFH 

• Double-ended parting and grooving blades
• For use with  DO-GRIP and HELI-GRIP DGN / DGNC  double-ended inserts.  

Double ended insert self clamped for deep grooving and large diameters. Screw clamped for small diameters. Extended, prismatic surfaces guarantee reliable, foolproof clamping even in unstable machining conditions.

DGFH  DO-GRIP Double Ended Parting And Grooving Blades 

DGFH 32-4 DO-GRIP Double Ended Parting And Grooving Blade

Pramet

Unleash precision and efficiency in radial parting and grooving operations with the Pramet Blade and Holder Parting Kit. This comprehensive tool and inserts kit is meticulously designed to elevate your machining capabilities. Engineered for versatility and reliability, the kit includes specialized blades and holders tailored for seamless parting and grooving tasks. Whether you're in metalworking, fabrication, or manufacturing, this kit empowers your cutting operations with precision and ease. The blade and holder parting kit is the go-to solution for creating clean, accurate cuts in materials, enhancing productivity, and achieving exceptional results in a variety of industrial applications. Upgrade your machining toolkit with the Pramet Blade and Holder Parting Kit for unmatched performance and precision in radial parting and grooving.

Features and Benefits
• Ideal for radial parting and grooving operations
• Engineered for versatility and reliability

Blade and Holder Parting Kit

KITXLCFN-26-3-M2-T8330 BLADE AND HOLDER PARTING (KIT-10)

KITXLCFN-26-3-T8330  BLADE AND HOLDER PARTING (KIT-10)

Parting Blades

Iscar

TGFH 32-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

2 Variations

Iscar

TGFH 26-3C Part-Off Blade Set C/W 10 TAG-3 IC808 Inserts

2 Variations

Iscar

SGIH-32-3 SELF-GRIP PARTING OFF BLADE

3 Variations

Iscar

TGFH 26-4 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

SGIH-26-3 SELF-GRIP PARTING OFF BLADE

3 Variations

Iscar

SGIH-32-4 SELF-GRIP PARTING OFF BLADE

3 Variations

Iscar

TGFH 26-2 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

TGFH 26-3 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

TGFH 32-2 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

TGFH 32-3 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

TGFH 32-4 - TANG-GRIP - TGFH/R/L Blade

29 Variations

Iscar

DGFH 32-4 DO-GRIP Double Ended Parting And Grooving Blade

11 Variations

Pramet

KITXLCFN-26-3-M2-T8330 BLADE AND HOLDER PARTING (KIT-10)

6 Variations

Pramet

KITXLCFN-26-3-T8330 BLADE AND HOLDER PARTING (KIT-10)

6 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB