Pulleys & Sprockets

Bushes

Pulley Alignment Tool

Sprockets

Timing Pulleys

V Grooved Pulleys

Bearings & Transmissions

bore_diametermm

bore_type

chain_reference_number

flange

groove_profile

large_diametermm

material

number_of_grooves

number_of_teeth

outside_diametermm

pitch

pitch_diameter_pdmm

product_material

product_type

pulley_style

sprocket_type

taper_bush

taper_bush_number

type

brand

categoryId

stockStatus

Dunlop BTL

Manufactured to internationally recognised standards DIN8187-ISO/R 606 and are produced from C45 steel UNI EN 10083-1 having a minimum strength of 600 N/mm 2. They have induction hardened teeth to reduce tooth wear so extending the
sprockets working life. 
 Conveniently held in stock in all popular metric bore sizes (dimension D), and corresponding key way that is located on the centre line of a tooth and 2 grub screws at 90° to each other for securing to a shaft. Available from stock to suit British standard roller chains from 06B (3/8" pitch)  sizes in Simplex (single) row of teeth.

06B-1 simplex Sprockets - Pre-bored

3SR15 3/8 SIMPLEX SPROCKET 14mm BORE & KEYWAY

Challenge Power Transmission

Simplex
A full range of both Taper bore and Pilot bore sprockets are available in Simplex, Duplex and Triplex forms. We also carry in stock a full range of taper bore bushes to suit.

Duplex and Triplex sprockets are also available, please ask for details.

Chain Sprockets - Taper Bore Type: Simplex

41-15 1/2" BS 15 TOOTH TL SIMPLEX SPROCKET 1008

61-15 3/4" BS 15 TOOTH TL SIMPLEX SPROCKET 1610

61-19 3/4" BS 19 TOOTH TL SIMPLEX SPROCKET 2012

1/2" Simplex - Pilot Bore

A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles.

We also carry a complete range of taper bore bushes and keyway steels to suit.
• All sprockets are manufactured to exacting standards and specification
• Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket
• Boring and keyway service for pilot bore sprockets is available on request
• Cast iron and stainless steel sprockets are also available

Pilot Bore  sprockets are manufactured to internationally recognised standards DIN8187-ISO/R 606 and are produced from C45 steel UNI EN 10083-1 having a minimum strength of 600 N/mm 2.  They have induction hardened teeth to reduce tooth wear so extending the sprockets working life.

Available to suit British standard roller Simplex chains 08B (1/2" pitch) sizes.



08B-1 (1/2" x 5/6") - Simplex Sprockets - Pilot Bore 

4SR15 08B (1/2" x 5/6") - Simplex Sprockets - Pilot Bore - 1/2" Pitch

4SR23 08B (1/2" x 5/6") - Simplex Sprockets - Pilot Bore - 1/2" Pitch

Used to fit pulleys and chain sprockets onto a shaft and retained using 
keysteel. Taper bore bushes are easy to assemble and are an ideal method of connecting to a shaft without expensive machining. 
Other Sizes are available - please ask for details

Taper Bushes are a convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper Bushes are pre-machined with the required bore & keyway size and are supplied complete with locking set screws.

Taper Bushes are designed for use with V-Pulleys, Chain Sprockets, Micro V-Pulleys, Timing Belt Pulleys, Couplings, and Weld-On & Bolt-On Hubs. 

Part numbers are identified by a 4 digit number (e.g. 1610) which represents the taper bush series followed by the bore size (e.g. 28mm) for example 1610x28mm.

Taper Bushes - Metric

1008-16 METRIC TAPER BUSH

1008-20 METRIC TAPER BUSH

1008-22 METRIC TAPER BUSH

1008-24 METRIC TAPER BUSH

1008-25 METRIC TAPER BUSH

1108-19 METRIC TAPER BUSH

1108-22 METRIC TAPER BUSH

3/8" Simplex - Taper Bore
A full range of sprockets in both Taper Bore and Pilot Bore are available in Simplex, Duplex and Triplex styles.

We also carry a complete range of taper bore bushes and keyway steels to suit.

• All sprockets are manufactured to exacting standards and specification.
• Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket.
• Boring and keyway service for pilot bore sprockets is available on request.
• Cast iron sprockets are also available on request.

Taper bore sprockets are manufactured to internationally recognised standards DIN8187-ISO/R 606 and are produced from C45 steel UNI EN 10083-1 having a minimum strength of 600 N/mm 2 and GG22 EN-GJL-200 UNI 1561 cast iron.  They have a black phosphated finish to increase corrosion resistance so extending the sprockets working life.
 

Convenient taper bore to suit a standard taper bush that are pre-bored to suit both metric & imperial bore and key way sizes. Available to suit British standard roller chains 06B-1 (Simplex) 3/8" pitch sizes.

06B (3/8" x 7/32") Simplex Sprockets - Taper Bore 

31-20 06B (3/8" x 7/32") Simplex Sprockets - - Taper Bore - 3/8" Pitch

1210-30 METRIC TAPER BUSH

A full range of sprockets in both Taper bore & Pilot bore are available in Simplex, Duplex and Triplex styles.
We also carry a complete range of taper bore bushes and keyway steels to suit.
• All sprockets are manufactured to exacting standards and specification
• Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket.
• Boring and keyway service for pilot bore sprockets is available on request.
• Cast iron sprockets are also available on request.

Taper bore sprockets are manufactured to internationally recognised standards DIN8187-ISO/R 606 and are produced from C45 steel UNI EN 10083-1 having a minimum strength of 600 N/mm 2 and GG22 EN-GJL-200 UNI 1561 cast iron.  They have a black phosphated finish to increase corrosion resistance so extending the sprockets working life.
 
Convenient taper bore to suit a standard taper bush that are pre-bored to suit both metric & imperial bore and key way sizes. Available to suit British standard roller chains 08B-1 (Simplex) 1/2" pitch sizes.


08B-1 (1/2" x 5/16") Simplex Sprockets - Taper Bore 


41-14(1008) 1/2" SIMPLEX SPROCKET TAPER BORE

41-17(1210) 1/2" SIMPLEX SPROCKET TAPER BORE

41-20(1610) 1/2" SIMPLEX SPROCKET TAPER BORE

41-23(1610) 1/2" SIMPLEX SPROCKET TAPER BORE

5/8" Simplex - Taper Bore
A full range of sprockets in both Taper Bore and Pilot Bore are available in Simplex, Duplex and Triplex styles.

We also carry a complete range of taper bore bushes and keyway steels to suit.

• All sprockets are manufactured to exacting standards and specification.
• Taper bore bush versions allow for quick and simple installation without the need to machine the sprocket.
• Boring and keyway service for pilot bore sprockets is available on request.
• Cast iron sprockets are also available on request.

10B - Sprockets - 5/8" Pitch

51-17(1610) 5/8" SIMPLEX SPROCKET TAPER BORE

1610-24 METRIC TAPER BUSH

1610-25 METRIC TAPER BUSH

1610-28 METRIC TAPER BUSH

1610-30 METRIC TAPER BUSH

2012-24 METRIC TAPER BUSH

Pulleys & Sprockets

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Pulleys & Sprockets

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB