Drive Belts

Belt Tensioners

Timing Belts

V Belts

Wedge Belts

Bearings & Transmissions

belt_section

belt_type

belt_widthmm

brand

categoryId

stockStatus

Dunlop BTL

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Dunlop V-belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.
A Section

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has anti-static properties with good power transmission capabilities. It is suitable for both industrial machinery and agricultural equipment.

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. 

MECHANICAL FEATURES:

• Smooth starting and running.
• Wide range of drive speeds, using standard electric motors.
• Low maintenance.
• Highly efficient.
• No need for lubrication.
• Extremely wide horsepower ranges.
• Dampen vibration between driver and driven pulleys.
• Silent operations.
• Long Service Life.
• Easy Installation.
• Reduction in drive dimension.

CHEMICAL FEATURES:

• Working temperature range -30 ̊C to +80 ̊C.
• Resistance to oil and heat.
• Anti-static properties to ISO 1813.

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.





Standard Drive V-belt Wrapped - Section A (13mm x 8mm)

A47 Standard Drive V-belt Wrapped - Section A (13mm x 8mm) Inside Length 1194mm

Megadyne

Accu-Link adjustable V-belts are detachable tab type link belting. Make endless belts any length with a simple twist, no tools required. 

The ideal temporary replacement or permanent substitute for conventional rubber V-belts. Made from a urethane elastomer reinforced with a rugged polyester fabric, these belts maintain precise tension, deliver maximum power on single or multiple-belt drives and operate at the same horsepower ratings as rubber belts. 

Easy to assemble and install. Available in the most common types of 3L/Z, A, B and C cross sections. 
Longer lengths are available.

Adjustable Link V-Belts

A-LINK 1.829M ACCU LINK VEE BELT

Continental Contitech

Classical section wrapped V-belts to DIN 2215. Moderately oil-resistant. Resistant to temperatures from -55°C to +70°C. Electrically conductive (antistatic) to ISO 813. Insensitive to dust. Suitable for tropical climates.

Section: 10/Z. Max Width (b1): 10mm. Height (h): 6mm.
Section: 13/A. Max Width (b1): 13mm. Height (h): 8mm.
Section: 17/B. Max Width (b1): 17mm. Height (h): 11mm.
Section: 22/C. Max Width (b1): 22mm. Height (h): 14mm.

Belt Section 17/B (SPB/17)

Continental Conti-V Standard Multiflex V-Belts

17X3050 CONTI-V CLASSICAL V-BELT B120

17X3302 CONTI-V CLASSICAL V-BELT B130

Narrow Section Wrapped V-Belts: Belt Section 13/A (SPA/13)
DIN 7753 and BS 3790.

Features:
Moderately oil-resistant. Resistant to temperatures from -55°C to +70°C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 13/A (SPA/13)

Continental Conti-V Ultraflex

SPA3550 CONTI-V WEDGE BELT

Narrow Section Wrapped V-Belts: Belt Section 17/B (SPB/17)
DIN 7753 and BS 3790.

Features:
Moderately oil-resistant. Resistant to temperatures from -55°C to +70°C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 17/B (SPB/17)

SPB3750 CONTI-V WEDGE BELT

SPB4500 CONTI-V WEDGE BELT

Narrow Section Wrapped V-Belts: Belt Section 22/C (SPC/22)
DIN 7753 and BS 3790.

Features:
Moderately oil-resistant. Resistant to temperatures from -55°C to +70°C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 22/C (SPC/22)

Continental Conti-V Ultraflex: Belt Section 22/C (SPC/22)

SPC5600 CONTI-V WEDGE BELT

XL Timing Belts

DIN 5296
• Moderately oil-resistant.
• Temperature range -20°C up to +100°C (depending on application).
• Non-aging and ozone-resistant.
• Suitable for tropical climates.

Size designation (example)	
150XL037	
150	150" (381.0mm) pitch length,
XL	0.2" (5.08mm) tooth pitch,
037	3/8" (9.25mm) timing belt width.

Conti Synchrobelt® Timing Belts: XL Timing Belts

300L075 TIMING BELT

XL
Dunlop imperial timing belts are manufactured using the most advanced technology available.
Trapezoidal tooth profile and Polychloroprene teeth offer accurate meshing with the mating pulleys and this contributes to the ability to absorb shock loads and reduced interference. Fibreglass reinforcement for minimal elongation and a nylon fabric protects the tooth surface.

Timing Belts - Imperial

198XL037 RUBBER CHAIN TIMING BELT

More energy-efficient because it's more flexible. 
Highest power (kW) rating for longest service life. 
Raw edge design resists slip, even at low drive tensions. 
Maximum oil and heat resistance, static dissipating.

AX Section
BX Section

Raw Edged Cogged Belts

AX31 RAW EDGE BELT - STANDARD

AX34 RAW EDGE BELT - STANDARD

AX55 RAW EDGE BELT - STANDARD

Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Dunlop V-belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.
B Section

The classical wrapped Dunlop V-belt is a temperature and oil resistant universal drive belt that has antistatic properties with good power transmission capabilities.
 
Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320Li, where the first number denotes the width in mm, and the second number is the internal length in mm. 

It is suitable for both industrial machinery and agricultural equipment.

MECHANICAL FEATURES:

• Smooth starting and running.
• Wide range of drive speeds, using standard electric motors.
• Low maintenance.
• Highly efficient.
• No need for lubrication.
• Extremely wide horsepower ranges.
• Dampen vibration between driver and driven pulleys.
• Silent operations.
• Long Service Life.
• Easy Installation.
• Reduction in drive dimension.

CHEMICAL FEATURES:

• Working temperature range -30 ̊C to +80 ̊C.
• Resistance to oil and heat.

• Anti-static properties to ISO 1813.

IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION






Drive Belts

Key Information

Group Policies

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB

Drive Belts

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB