Pullers & Separators

Automotive

capacitymm

jaw_reachmm

maximum_jaw_openingmm

number_of_legs

product_type

reachmm

brand

categoryId

stockStatus

Automotive Tools

Pullers

Kennedy

Spare Jaws to suit Kennedy Mechanical Pullers. Supplied individually.

Spare Jaws for Mechanical Pullers

Spare Jaws To Suit 3" Double Ended Mechanical Pullers

Spare Jaws To Suit 4" Double Ended Mechanical Pullers

Spare Jaws To Suit MP2200, MP3200 & MP2200

Spare Jaws To Suit 8" Double Ended Mechanical Pullers

To suit the Kennedy 10 Ton Hydraulic Ram (KEN-503-7200K). N.B. Hydraulic Ram not included.

Seal Repair Kit for Hydraulic Ram

Seal Repair Kit For Kennedy HR10T Hydraulic Ram

Separators & Coil Spring Compressors

Sykes-Pickavant

Strengthened steel body and forks. The longer length allows greater force to be applied to separate the ball joint, can be used from outside the wing. 
Throat depth: 88mm. Overall length: 420mm.

Heavy Duty Ball Joint Separator

080600 BALL JOINT SEPARATOR

Strong, heavy duty body, with strengthened fork and lever, allows for greater force to be applied. Can be upgraded to hydraulic power (use Sykes Pickavant 08075000 Upgrade Kit)
Throat depth: 50mm.
Throat width: 36mm.

A tough ball joint separator that can be upgraded to hydraulic power (using Sykes Pickavant 08075000 Upgrade Kit)

Features and Benefits
• Strong, heavy duty body
• Strengthened fork and lever
• Can be upgraded to hydraulic power

Notes
• Throat depth: 50mm
• Throat width: 36mm

Ball Joint Separator - HGV

080700 BALL JOINT SEPARATOR

The jaws are manufactured from drop-forged steel with independent leaf springs for positive location. Suitable for the rapid removal of small bearings. Spread: 19 - 45mm.Reach: 73mm.

Have a simple, grease filled ram instead of the mechanical force screw. This produces more power easily and efficiently. The spring loaded plunger provides direct, non-twisting application of thrust safely.

Hydraulic Micro Puller - 3 Jaw
The jaws are manufactured from drop-forged steel with independent leaf springs for positive location. Suitable for the rapid removal of small bearings. 
Spread: 19 - 45mm. Reach: 73mm.

Hydraulic Puller

082150 MICRO PULLER

Reversible/Adjustable 2 & 3 Jaw
Two position jaws can be adjusted for increased pulling options. Spread: 60mm. 
Reach: 50mm

2 & 3 Jaw Reversible Adjustable 
Two position jaws can be adjusted for increased pulling options. 
Spread: 60mm.
Reach: 50mm.

Mechanical Pullers - Combination Set

082300 GOLD PULLER

Industrial Reversible/Double-Ended
The double-ended reversible/double-ended drop forged steel jaws, are heat treated for strength and durability. They can be used internally or externally.
083100: 
Spread: 200mm. 
Reach: 140mm.

Mechanical Puller - 2 Jaws

083100 TWIN LEG PULLER

Industrial Reversible/Adjustable
The points at which the jaws are attached to the pulling frame are adjustable, providing more pulling options.
083300
Spread: 350mm. 
Reach: 380mm.

Long Reach Mechanical Puller - 2 Jaw

083300 TWIN LEG PULLER

For use with Sykes-Pickavant split coller type internal extractors. 
Hammer displacement: 220mm.

For use with Sykes-Pickavant split collet type internal extractors. 
Hammer displacement: 220mm.

Slide Hammer Assembly

085421 SLIDE HAMMER ASSEMBLY

Manufactured from forged steel, with thin jaws for access where the clearance behind the component is limited.
086000 
Spread: 75mm. Reach: 75mm.
086100
Spread: 150mm. Reach: 150mm.
086200
Spread: 150mm. Reach: 225mm.

Thin/2 Jaw Mechanical Pullers

086000 TWIN LEG THIN JAW PULLER

086100 TWIN LEG THIN JAW PULLER

Bearing separator with two interchangeable thin jaw puller legs. Puller has a 75mm spread and reach. The separator has a maximum diameter of 55mm and a reach of 115mm.

093005 mechanical thin jaw gear puller kits provide extensive versatility and are available in many configurations including twin and triple leg and with bearing separators.

Pulling unit with small capacity separator and thin jaw legs to remove bearings inaccessible to standard puller jaws. 
Supplied in carton
Puller Reach Max: 75mm
Puller Spread: 0 - 75mm Max
External Spread Max: 55mm
   





Mechanical Puller & Separator Kit - Thin Jaw 75mm 

093005 BEARING PULLER SET

Manufactured from drop forged alloy steel with tapered jaws for insertion behind close fitting bearings and gears. For use with two legged pullers, hydraulic pullers and as an accessory to a power unit.

Bearing Separators

095000 BEARING SEPARATOR

Internal Extractor Kits
The collets are precision machined, supplied complete with sliding hammer assembly. For removing rapidly and efficiently gears, bearings, pinions, oil seals when conventional pullers cannot be used. Collets close down to allow passage through a bore and then 'wind' out to grip the blind side of the component.

Internal Extractor Kits
The collets are precision machined, supplied complete with sliding hammer assembly. For removing rapidly and efficiently gears, bearings, pinions, oil seals when conventional pullers cannot be used. Collets close down to allow passage through a bore and then 'wind' out to grip the blind side of the component.


**Images for illustration purposes only**

Internal Extractor Kits

095801 INTERNAL RACE EXTRACTOR SET

095802 BEARING EXTRACTOR 13-30MM

These split collets are designed to be pushed into the centre of a bearing and then expanded via a hex nut until a secure grip is achieved. After this, the slide hammer is attached, providing the necessary extracting force.

Features and Benefits
• Range of sizes from 8.5-10mm to 22-30mm to suit users needs 
• Holds tools in place securely

Typical Applications
• Holds work pieces and tools

Notes
• Adapter required for the 10/12mm split collet extractor tool (sold separately: SYK5032518N)

Collets for Internal Extractor Kits

095810 EXTRACTOR 8.5-10MM

095811 EXTRACTOR 10 -12MM

095812 EXTRACTOR 12-17MM

095813 EXTRACTOR 19-22MM

095814 EXTRACTOR 22-30MM

Collets for Sykes Pickavant mechanical slide hammer puller extractor kits.
2 sizes available:
095816: 38 - 50mm.
095817: 50 - 60mm.

Pullers & Separators

Kennedy

Spare Jaws To Suit 3" Double Ended Mechanical Pullers

4 Variations

Kennedy

Spare Jaws To Suit 4" Double Ended Mechanical Pullers

4 Variations

Kennedy

Spare Jaws To Suit MP2200, MP3200 & MP2200

4 Variations

Kennedy

Spare Jaws To Suit 8" Double Ended Mechanical Pullers

4 Variations

Kennedy

Seal Repair Kit For Kennedy HR10T Hydraulic Ram

Sykes-Pickavant

080600 BALL JOINT SEPARATOR

Sykes-Pickavant

080700 BALL JOINT SEPARATOR

Sykes-Pickavant

082150 MICRO PULLER

Sykes-Pickavant

082300 GOLD PULLER

Sykes-Pickavant

083100 TWIN LEG PULLER

Sykes-Pickavant

083300 TWIN LEG PULLER

Sykes-Pickavant

085421 SLIDE HAMMER ASSEMBLY

Sykes-Pickavant

086000 TWIN LEG THIN JAW PULLER

2 Variations

Sykes-Pickavant

086100 TWIN LEG THIN JAW PULLER

2 Variations

Sykes-Pickavant

093005 BEARING PULLER SET

Sykes-Pickavant

095000 BEARING SEPARATOR

Sykes-Pickavant

095801 INTERNAL RACE EXTRACTOR SET

4 Variations

Sykes-Pickavant

095802 BEARING EXTRACTOR 13-30MM

4 Variations

Sykes-Pickavant

095810 EXTRACTOR 8.5-10MM

5 Variations

Sykes-Pickavant

095811 EXTRACTOR 10 -12MM

5 Variations

Sykes-Pickavant

095812 EXTRACTOR 12-17MM

5 Variations

Sykes-Pickavant

095813 EXTRACTOR 19-22MM

5 Variations

Sykes-Pickavant

095814 EXTRACTOR 22-30MM

5 Variations

Sykes-Pickavant

095816 EXTRACTOR 38-50MM

Sykes-Pickavant

095817 EXTRACTOR 50-60MM

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB