Cylinder, Piston & Valve Tools

Automotive

grit

hone_lengthmm

maximum_bore_sizemm

minimum_bore_sizemm

opening_capacitymm

product_type

throat_depthmm

brand

categoryId

stockStatus

rangeable_number_of_pieces

Automotive Tools

Piston Ring, Valve & Grinding Tools

Kennedy

Designed for use on production lines as well as in the automotive workshop. Able to 
cope with occasional commercial use. Manufactured from bright nickel plated steel with 
PVC cushion grips.

Valve & Piston Ring Compressors

VALVE SPRING COMPRESSOR 3 "-9" CAPACITY

To enable fast Installation or removal of piston rings. A self-adjusting spring tensioned mechanism manufactured from nickel-plated steel with PVC handles for extra grip.
Capacity: 50 - 100mm (2" - 4")

Piston Ring Pliers

PISTON RING PLIERS 50-100 mm CAPACITY

The compressor gently compresses the piston rings into position reducing the risk of damage to components during installation. Key operated with ratchet mechanism and safety valve for combining safe rapid compression with positive control. Made from tempered spring steel complete with steel key.

PRC-540
For passenger car vehicle engines. Capacity: 57 - 125mm (2 1/4” - 5”). Height: 80mm (3 1/4”).

PRC-730
For car/light commercial vehicle engines. Capacity: 90 - 175mm (3 1/2” - 7”). Height: 100mm (4”).

PRC-765
For heavy commercial vehicle engines. Capacity: 90 - 175mm (3 1/2” - 7”). Height: 165mm (6 1/2”).

Piston Ring Compressors

PISTON RING COMPRESSOR 57-125mm CAPACITY 80mm HT.

PISTON RING COMPRESSOR 90-175mm CAPACITY 100mm HT.

PISTON RING COMPRESSOR 90-175mm CAPACITY 165mm HT.

Standard Length
For the easy removal of most valve stem seals and lower valve spring guides in restricted areas above the cylinder head. Overall length: 250mm, 50mm reach.

Extra Long
For the easy removal of most valve stem seals in multi-valve engines in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double riveted metal handles.
Overall length: 270mm, 80mm reach.

Straight Head Valve Seal Ring Pliers

EXTRA LONG VALVE SEAL RING PLIERS

Fully adjustable valve spring compressor for use on large and diesel engines. A unique ‘direct action’ compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy duty steel with all riveted joints and a slip resistant rubber handle.
Restricted access adaptors: 25mm, 30mm.
Jaw opening: min 35mm, max 200mm.
Throat clearance: 250mm.

Valve Spring Compressor

VALVE SPRING COMPRESSOR 3 5-200mm

Fully adjustable valve spring compressor for use on multi-valve petrol and diesel engines with deep seated valves. Universal model with unique dual-cam action, parallel lift and automatic locking reversible jaw/ adaptor, suitable for general use on a wide range of OHC, OHV and CVH engines. A unique ‘direct action’ compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy-duty steel with all riveted joints and a slip resistant rubber handles.
Restricted access adaptors: 25mm, 30mm.
Jaw opening: min 55mm, max 175mm.
Throat clearance: 165mm.
Packaging dimensions (W x H x D): 430 x 205 x 40mm.

VALVE SPRING COMPRESSOR 5 5-175mm

Cylinder Head, Honing & Camshaft Tools

For honing of brake cylinders and piston bores with capacities between 51 - 178mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant. 
Overall length: 290mm.

For honing of brake cylinders and piston bores with capacities between 51 - 178mm. Self-aligning flexible shaft and leg assembly for smooth operation at all speeds. 

Features and Benefits
•  Honing diameter and pressure is adjusted via a simple, spring and cone mechanism
•  Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks
•  Supplied complete with a fine grade stone set

Notes
•  For storage purposes legs are retained in position by a triangular clip - can be removed using long nose pliers or tweezers and should be retained for further use
•  Replacement stone sets available
•  Use brake fluid for cutting lubricant
•  Overall length: 290mm

Heavy-Duty Cylinder Hone

HEAVY DUTY CYLINDER HONE 3-LEG

Suitable for honing/deglazing car brake and clutch cylinders, motorcycle, lawnmower, outboard motor engine cylinders, small bore car engine cylinders with capacities between 18mm - 89mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all 3 jaw chucks. 
Set contents: Main honing body, 2 leg set - 60mm, 3 leg set - 60mm, 3 leg set - 50mm, 3 medium honing stones - 19, 28.8 and 51mm.
Overall length: 200mm. 
Supplied in a plastic blow mould case.

Four different cylinder honing tools in one set, perfect for honing/deglazing car brake and clutch cylinders, motorcycle, lawnmower, outboard motor engine cylinders, small bore car engine cylinders with capacities between 18mm - 89mm. 

Features and Benefits
• Self-aligning flexible shaft and leg assembly for smooth operation at all speeds and easy alignment
• Honing diameter and pressure is adjusted via a simple, spring and cone mechanism
• Suitable for use with a variable speed electric or air drill and fits into all three-jaw chucks 

Contents
• Main honing body
• Twin-leg set - 50mm
• Triple leg set - 50mm
• Triple leg set - 60mm
• Medium stones: 19 x 4.5mm (x3 off)
• Medium stones: 29 x 4.5mm (x5 off) 
• Medium stones: 51 x 7.0mm (x3 off)
• Blow-moulded plastic case

Typical Applications
• Automotive industries

4-in-1 Cylinder Hone Set - 15 Pieces

4-in-1 Cylinder Honing Tool Set

For honing of brake cylinders and piston bores with capacities between 19 - 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all 3 jaw chucks. Supplied complete with a medium grade stone set. For storage purposes legs are retained in position by a triangular clip. This can be removed using long nose pliers or tweezers and should be retained for further use. Replacement stone sets available. Use brake fluid for cutting lubricant. 
Overall length: 200mm.

This cylinder hone is designed for the honing of brake cylinders and piston bores with capacities between 19 - 68mm. It has a self-aligning flexible shaft and leg assembly to ensure smooth operation at all speeds. The honing diameter and pressure can be adjusted by a simple spring and cone mechanism. It is supplied complete with a medium grade stone set.

Features and Benefits
• Self-aligning flexible shaft
• Spring and cone mechanism
• Medium grit

Typical Applications
• Suitable for use with a variable speed electric or air drill
• Fits into all 3 jaw chucks 

Cylinder Hone, 3-leg

BRAKE CYLINDER HONE 3-LEG

To suit Kennedy cylinder hone KEN5032920K. Also compatible with most other leading brands. Pack of 3.

High quality cylinder honing stones. Available in a range of abrasive grades to suit any task.

Features and Benefits
• Allows the inside surfaces of engine cylinders to be efficiently cleaned of carbon deposits, and re-surfaced quickly and effectively

Typical Applications
• To suit Kennedy cylinder hone 503-292
• Also compatible with most other leading brands

Notes
• Pack of 3

Replacement Stone Sets 

CYLINDER HONING STONES FINE 100x9.00mm 3-PCE SET 

CYLINDER HONING STONES MEDIUM 100x9.00mm 3-PCE SET

CYLINDER HONING STONES COARSE 100x9.00mm 3-PCE SET

Replacement cylinder honing stones to suit Kennedy cylinder hones. Also compatible with most other leading brands. Pack of 3.

Replacement Honing Stone Sets - 3 Piece, Medium

CYLINDER HONING STONES MEDIUM 29x4.50mm 3-PCE SET

CYLINDER HONING STONES MEDIUM 19x4.50mm 3-PCE SET

CYLINDER HONING STONES MEDIUM 51x7.00mm 3-PCE SET

Laser Tools

Designed for the simple installation and removal of spring loaded piston rings, this simple yet effective tool makes an excellent addition to any mechanic's toolkit. 

Features and Benefits
• Allows for controlled installation and removal which prevents breakage
• Vinyl grip handles for user comfort
• Spring loaded handles reduce some of the effort when installing or removing rings

Typical Applications
• Automotive

Piston Ring Installer/Remover

PISTON RING INSTALLER/REMOVER

Sykes-Pickavant

Suitable for use with electric or air power drills. To hone and deglaze cylinder bores. 
The flexible drive shaft allows for easy alignment within the cylinder. Supplied complete with 220 grit stones.

Cylinder Hone

028000 CYLINDER HONE

To suit Cylinder Hone 028000. 
Contents: 3x 19mm, 3x 29mm, 3x 50mm stones and nine replacement spring clips. 
(Cylinder hone not included.)

2800 Cylinder Hone Stone Sets 

028001 FINE STONE SET

028002 MED STONE SET

028100 CYLINDER HONE

To suit Cylinder Hone 028100.
Contents: 3x 100mm stones and three replacement cotter pins.

2810 Cylinder Hone Stone Sets

028102 MED STONE SET

028103 COARSE STONE SET

For holding piston rings in place once removed from the cylinder. Made from tempered spring steel with spring assisted ratchet type lock. Supplied complete with square drive key..

For holding piston rings in place once removed from the cylinder. Made from tempered spring steel with spring assisted ratchet type lock. Supplied complete with square drive key.

Cylinder, Piston & Valve Tools

Kennedy

VALVE SPRING COMPRESSOR 3 "-9" CAPACITY

Kennedy

PISTON RING PLIERS 50-100 mm CAPACITY

Kennedy

PISTON RING COMPRESSOR 57-125mm CAPACITY 80mm HT.

3 Variations

Kennedy

PISTON RING COMPRESSOR 90-175mm CAPACITY 100mm HT.

3 Variations

Kennedy

PISTON RING COMPRESSOR 90-175mm CAPACITY 165mm HT.

3 Variations

Kennedy

EXTRA LONG VALVE SEAL RING PLIERS

2 Variations

Kennedy

VALVE SPRING COMPRESSOR 3 5-200mm

Kennedy

VALVE SPRING COMPRESSOR 5 5-175mm

Kennedy

HEAVY DUTY CYLINDER HONE 3-LEG

Kennedy

4-in-1 Cylinder Honing Tool Set

Kennedy

BRAKE CYLINDER HONE 3-LEG

Kennedy

CYLINDER HONING STONES FINE 100x9.00mm 3-PCE SET

3 Variations

Kennedy

CYLINDER HONING STONES MEDIUM 100x9.00mm 3-PCE SET

3 Variations

Kennedy

CYLINDER HONING STONES COARSE 100x9.00mm 3-PCE SET

3 Variations

Kennedy

CYLINDER HONING STONES MEDIUM 29x4.50mm 3-PCE SET

3 Variations

Kennedy

CYLINDER HONING STONES MEDIUM 19x4.50mm 3-PCE SET

3 Variations

Kennedy

CYLINDER HONING STONES MEDIUM 51x7.00mm 3-PCE SET

3 Variations

Laser Tools

PISTON RING INSTALLER/REMOVER

Sykes-Pickavant

028000 CYLINDER HONE

2 Variations

Sykes-Pickavant

028001 FINE STONE SET

2 Variations

Sykes-Pickavant

028002 MED STONE SET

2 Variations

Sykes-Pickavant

028100 CYLINDER HONE

2 Variations

Sykes-Pickavant

028102 MED STONE SET

3 Variations

Sykes-Pickavant

028103 COARSE STONE SET

3 Variations

Sykes-Pickavant

660370 PISTON RING COMPRESSOR

2 Variations

Key Information

Group Policies

© 2024 TED. All rights reserved.Producer Register Limited Number: IE01113WB

© 2024 TED. All rights reserved.
Producer Register Limited Number: IE01113WB